Introduction to Stick type mold heating furnace, introduction to forging furnace advantages and characteristics

Stick type mold heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，widely used in petroleum, light industry, electron, material, Household necessities and other fields。

1、Brief introduction of Stick type mold heating furnace

Stick type mold heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the product looks beautiful.，The overall structural design is simple and novel.，it is mainly composed of combustor, ventilation system, Radiation chamber, convection chamber and furnace chamber，the product looks beautiful.，it has the functions of Casting heating, heat treatment, quench, Forging heating and temper。

Stick type mold heating furnace

2、Stick type mold heating furnace use

The purpose of Stick type mold heating furnace is introduced as follows:

1. Improve production efficiency

The Stick type mold heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal tempering

By properly heating and cooling the metal material, the Stick type mold heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Energy conservation and environmental protection

The Stick type mold heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Stick type mold heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal heat treatment

In addition to forging heating, Stick type mold heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Stick type mold heating furnace

3、Stick type mold heating furnace video live broadcast

You can buy Stick type mold heating furnace according to your needs and show you product videos.。

Stick type mold heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd multifunctional, with functions such as normalizing, hardening and tempering, Forging heating, heat treatment and quench。

4、Stick type mold heating furnace function

Stick type mold heating furnacemultifunctional, with functions such as anneal, Casting heating, temper, hardening and tempering and normalizing，be loved by our customers.。

Stick type mold heating furnace

5、Stick type mold heating furnace structure composition

The Stick type mold heating furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. Radiation chamber

The heat load of the main place for Stick type mold heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Stick type mold heating furnace

6、Stick type mold heating furnace price concessions

The Stick type mold heating furnace price is introduced as follows:

1. quality factor

Quality is one of the fundamental and important factors that affect the price. Usually, the better the quality of the Stick type mold heating furnace, the higher its price, and the quality is mainly affected by the manufacturing process, raw material materials, workers' experience and other factors. Therefore, if customers want to buy products with better quality, they can conduct on-the-spot visits to the product manufacturers to learn more about the scale, manufacturing process and production capacity of the manufacturers, so as to comprehensively judge the quality of the products.

2. Manufacturer's strength

One-combustion energy saving's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

3. raw material

The higher the cost of materials, the higher the price will be. In the process of purchasing products, users need to make a detailed understanding of the materials selected for products.

4. Sales model

One-combustion energy saving Stick type mold heating furnace manufacturer is a strong and professional Stick type mold heating furnacemachine shop, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Stick type mold heating furnace price is also low.

5. Brand strength

At present, there are various brands of Stick type mold heating furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Stick type mold heating furnace are different.

Stick type mold heating furnace

Stick type mold heating furnaceIt can be used for Improve production efficiency, Metal heat treatment, Metal heat treatment, Energy conservation and environmental protection, Metal tempering, Metal melting and casting and so on，features include Easy to maintain, Stable and reliable, energy saving and environmental protection, energy-efficient and Strong adaptability，it has the structure of combustor, Radiation chamber, furnace chamber, recovery of waste heat and ventilation system。