Introduction to Automatic temperature regulating roller bottom furnace, how much is the price of the Forging furnace?

Automatic temperature regulating roller bottom furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，is a kind of high quality and low price Automatic temperature regulating roller bottom furnace，was developed and designed by One-combustion energy saving。

1、Brief introduction of Automatic temperature regulating roller bottom furnace

Automatic temperature regulating roller bottom furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，features include Strong adaptability, energy-efficient, Strong adaptability, Stable and reliable and Easy to control，it is widely used in building materials, Machinery manufacturing, war industry, light industry and Household necessities。

Automatic temperature regulating roller bottom furnace

2、Automatic temperature regulating roller bottom furnace HD real shot

Display of Automatic temperature regulating roller bottom furnace with different specifications and models。

Automatic temperature regulating roller bottom furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Introduction of Automatic temperature regulating roller bottom furnace characteristics

Automatic temperature regulating roller bottom furnace has the following characteristics

1. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Automatic temperature regulating roller bottom furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

2. Easy to maintain

The structural design of the Automatic temperature regulating roller bottom furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Efficient heating

The Automatic temperature regulating roller bottom furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Automatic temperature regulating roller bottom furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automatic temperature regulating roller bottom furnace

4、Automatic temperature regulating roller bottom furnace function

Automatic temperature regulating roller bottom furnaceit has the functions of temper, Forging heating, quench, anneal and Casting heating，at work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Automatic temperature regulating roller bottom furnace

5、Structural characteristics of Automatic temperature regulating roller bottom furnace

The Automatic temperature regulating roller bottom furnace has the following structure

1. Radiation chamber

The heat load of the main place for Automatic temperature regulating roller bottom furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Automatic temperature regulating roller bottom furnace

6、Automatic temperature regulating roller bottom furnace price advantage

The Automatic temperature regulating roller bottom furnace price is introduced as follows:

1. product configuration

If the comprehensive configuration of the product is higher, the selling price of the product will be higher, otherwise the price will be lower, so there is a close relationship between the configuration level and the price.

2. regional difference

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

3. market factors

The degree of market competition is also an important factor affecting the price change of products. In order to improve the purchasing power of customers, manufacturers will take preferential measures and appropriately reduce prices.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. mass discrepancy

The selling price of excellent quality products is also high, so customers should also consider the quality and price of products comprehensively in the process of purchasing products, so as to buy products with high cost performance.

Automatic temperature regulating roller bottom furnace

Automatic temperature regulating roller bottom furnacethe advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，the main features are Easy to maintain, energy saving and environmental protection, energy-efficient, Strong adaptability and Easy to maintain。