What is a Well type high-temperature quenching furnace? Forging furnace specifications, models, and parameters

Well type high-temperature quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Mainly used forMetal heat treatment,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection andImprove production efficiency，is a common Well type high-temperature quenching furnace，it is an ideal choice for customers to buy Well type high-temperature quenching furnace。

1、Brief introduction of Well type high-temperature quenching furnace

Well type high-temperature quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，usually used in automobile, metallurgy, war industry, Household necessities, aerospace and other fields，It has a wide range of uses, and is often used inMetal tempering,Metal heat treatment,Metal tempering,Metal melting and casting,Energy conservation and environmental protection and so on。

Well type high-temperature quenching furnace

2、Well type high-temperature quenching furnace use

The purpose of Well type high-temperature quenching furnace is introduced as follows:

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type high-temperature quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Energy conservation and environmental protection

The Well type high-temperature quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Energy conservation and environmental protection

The Well type high-temperature quenching furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Well type high-temperature quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Well type high-temperature quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Well type high-temperature quenching furnace

3、Well type high-temperature quenching furnace real shot picture

HD picture of One-combustion energy saving Well type high-temperature quenching furnace,Easy to maintain。

Well type high-temperature quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Well type high-temperature quenching furnace structure

The Well type high-temperature quenching furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Well type high-temperature quenching furnace

5、Well type high-temperature quenching furnace performance advantage

The advantages of Well type high-temperature quenching furnace are as follows:

1. Efficient combustion

The Well type high-temperature quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. Rapid temperature rise

The Well type high-temperature quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Extend the service life of equipment

The Well type high-temperature quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

5. Improve product quality

Because the Well type high-temperature quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Well type high-temperature quenching furnace

6、One-combustion energy saving delivery site

The following is the live video of Well type high-temperature quenching furnace designed and produced by One-combustion energy saving for users, from which we can see the the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency. of One-combustion energy savingWell type high-temperature quenching furnace.。

Well type high-temperature quenching furnace

As you can see from the live video.One-combustion energy saving it has the functions of Forging heating, Forging heating, heat treatment, Casting heating and normalizing。

Well type high-temperature quenching furnaceit mainly includes convection chamber, combustor, convection chamber, Radiation chamber and furnace chamber，productSimple structure and reliable operation.，the product looks atmospheric.。