Introduction to Quenching and tempering well type annealing furnace, introduction to forging furnace advantages and characteristics

Quenching and tempering well type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The price is more affordable。

1、Brief introduction of Quenching and tempering well type annealing furnace

Quenching and tempering well type annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is mainly composed of combustor, ventilation system, convection chamber, furnace chamber and ventilation system，is a kind of Quenching and tempering well type annealing furnace manufactured by One-combustion energy saving。

Quenching and tempering well type annealing furnace

2、Quenching and tempering well type annealing furnace use

The purpose of Quenching and tempering well type annealing furnace is introduced as follows:

1. Metal forging heating

The Quenching and tempering well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Quenching and tempering well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal heat treatment

In addition to forging heating, Quenching and tempering well type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Quenching and tempering well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal tempering

By properly heating and cooling the metal material, the Quenching and tempering well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Quenching and tempering well type annealing furnace

3、Working principle of Quenching and tempering well type annealing furnace

Quenching and tempering well type annealing furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a Quenching and tempering well type annealing furnace，the product looks beautiful.，support customization。

Quenching and tempering well type annealing furnace

4、Quenching and tempering well type annealing furnace advantage

The advantages of Quenching and tempering well type annealing furnace are as follows:

1. Wide application range

The Quenching and tempering well type annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Rapid temperature rise

The Quenching and tempering well type annealing furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

3. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

4. Efficient combustion

The Quenching and tempering well type annealing furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Uniform heating

The Quenching and tempering well type annealing furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

Quenching and tempering well type annealing furnace

5、Introduction of Quenching and tempering well type annealing furnace characteristics

Quenching and tempering well type annealing furnace has the following characteristics

1. Stable and reliable

The Quenching and tempering well type annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Efficient heating

The Quenching and tempering well type annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to maintain

The structural design of the Quenching and tempering well type annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Quenching and tempering well type annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

5. Strong adaptability

The Quenching and tempering well type annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Quenching and tempering well type annealing furnace

6、Structural advantages of Quenching and tempering well type annealing furnace

The Quenching and tempering well type annealing furnace has the following structure

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Quenching and tempering well type annealing furnace

Quenching and tempering well type annealing furnaceit can be used in heat treatment, metallurgy, petroleum, chemical industry, light industry and other industries，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。