What is a Heat treatment well furnace? How much is the price of the heating furnace?

Heat treatment well furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，modern technology。

1、Brief introduction of Heat treatment well furnace

Heat treatment well furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the functions of Casting heating, hardening and tempering, temper, hardening and tempering and quench，was developed and designed by One-combustion energy saving。

Heat treatment well furnace

2、Heat treatment well furnace characteristics

The Heat treatment well furnace features are as follows:

1. Strong adaptability

The Heat treatment well furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Efficient heating

The Heat treatment well furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

4. Easy to maintain

The structural design of the Heat treatment well furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Heat treatment well furnace

3、Heat treatment well furnace use

The purpose of Heat treatment well furnace is introduced as follows:

1. Metal forging heating

The Heat treatment well furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Heat treatment well furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Heat treatment well furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Heat treatment well furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment well furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Heat treatment well furnace

4、Heat treatment well furnace structure composition

The Heat treatment well furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

4. furnace chamber

A space for holding metallic materials for heating.

5. Radiation chamber

The heat load of the main place for Heat treatment well furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Heat treatment well furnace

5、Heat treatment well furnace price

The Heat treatment well furnace price is introduced as follows:

1. market supply and demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Heat treatment well furnace price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

2. Different regions

If the location of the manufacturer is superior, its transportation will be more convenient. One-combustion energy saving address:Jinan, Shandong province has convenient transportation, which provides a good convenience for the transportation of Heat treatment well furnace.

3. Model size

The same type of products, with different specifications, models and sizes, have different costs, so the quotations to customers naturally vary. Generally speaking, the larger the model, the higher the price, and the smaller the model, the lower the price.

4. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Heat treatment well furnace price and service can meet the actual needs of customers.

5. Proper management mode

Manufacturers mainly implement the sales mode of small profits but quick turnover and online direct sales. The prices of products are generally low, and the prices are clearly marked, and they will not be more expensive at will. In addition, manufacturers mainly establish communication and negotiation relations with customers through the Internet and telephone, which can greatly reduce the investment in facade expenses, and the production cost of manufacturers is low, so the price of Heat treatment well furnace is low.

Heat treatment well furnace

6、company strength

The company has many years of Heat treatment well furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Heat treatment well furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it can be used in war industry, metallurgy, pharmacy, surface treatment, petroleum and other industries。