Introduction to Heat treatment well type annealing furnace, introduction to Forging furnace function advantages and characteristics

Heat treatment well type annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，it has been widely used in automobile, Machinery manufacturing, heat treatment, building materials, electron and other industries，Widely used in Metal heat treatment, Metal melting and casting, Metal tempering, Improve production efficiency and Energy conservation and environmental protection。The following is to introduce the Heat treatment well type annealing furnace:

1、Brief introduction of Heat treatment well type annealing furnace

Heat treatment well type annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，energy-efficient,Easy to maintain,Easy to control,Stable and reliable,Easy to maintain，is a Heat treatment well type annealing furnace，it is an ideal choice for customers to buy Heat treatment well type annealing furnace。

Heat treatment well type annealing furnace

2、Heat treatment well type annealing furnace picture

High-definition pictures of reliable Heat treatment well type annealing furnace at a glance。

Heat treatment well type annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Heat treatment well type annealing furnace principle

Heat treatment well type annealing furnaceat runtime,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，energy-efficient,Strong adaptability,Easy to control,energy saving and environmental protection,Strong adaptability，is a Heat treatment well type annealing furnace newly developed by One-combustion energy saving。

Heat treatment well type annealing furnace

4、Heat treatment well type annealing furnace application

Heat treatment well type annealing furnaces have the following purposes.

1. Energy conservation and environmental protection

The Heat treatment well type annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Heat treatment well type annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Heat treatment well type annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal heat treatment

In addition to forging heating, Heat treatment well type annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal tempering

By properly heating and cooling the metal material, the Heat treatment well type annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Heat treatment well type annealing furnace

5、Heat treatment well type annealing furnace function

Heat treatment well type annealing furnacemultifunctional, with functions such as anneal, Forging heating, normalizing, quench and Casting heating，it is widely used inmachinery,light industry,shipping,material,aerospace and other industries。

Heat treatment well type annealing furnace

Heat treatment well type annealing furnaceUniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，the product looks atmospheric.，It is mostly used in Metal heat treatment, Metal forging heating, Metal melting and casting, Metal tempering, Improve production efficiency, Energy conservation and environmental protection and so on。