Introduction to High temperature bright multi well heating furnace and forging furnace structure principle

High temperature bright multi well heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，is a High temperature bright multi well heating furnace，it has been widely used in Household necessities, light industry, building materials, pharmacy, shipping and other industries，customizable。The following is to introduce the High temperature bright multi well heating furnace:

1、Brief introduction of High temperature bright multi well heating furnace

High temperature bright multi well heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，It is mostly used in Improve production efficiency, Metal heat treatment, Metal forging heating, Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection and so on，it has the structure of ventilation system, ventilation system, recovery of waste heat, Radiation chamber and furnace chamber，productThe structural design is simple, novel and special.，it has the functions of temper, Forging heating, Casting heating, heat treatment and anneal。

High temperature bright multi well heating furnace

2、High temperature bright multi well heating furnace principle

High temperature bright multi well heating furnacethe principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

High temperature bright multi well heating furnace

3、High temperature bright multi well heating furnace function

High temperature bright multi well heating furnaceit has the functions of anneal, Casting heating, quench, normalizing and Forging heating，the product looks atmospheric.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular High temperature bright multi well heating furnace。

High temperature bright multi well heating furnace

4、High temperature bright multi well heating furnace use

The purpose of High temperature bright multi well heating furnace is introduced as follows:

1. Metal forging heating

The High temperature bright multi well heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The High temperature bright multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the High temperature bright multi well heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The High temperature bright multi well heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Energy conservation and environmental protection

The High temperature bright multi well heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

High temperature bright multi well heating furnace

5、High temperature bright multi well heating furnace advantage

The advantages of High temperature bright multi well heating furnace are as follows:

1. Wide application range

The High temperature bright multi well heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Multiple fuel options

Although the High temperature bright multi well heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

4. Efficient combustion

The High temperature bright multi well heating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Uniform heating

The High temperature bright multi well heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

High temperature bright multi well heating furnace

High temperature bright multi well heating furnaceThe high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，is a kind of high quality and low price High temperature bright multi well heating furnace，multifunctional, with functions such as temper, heat treatment, hardening and tempering, anneal and temper。