Introduction to Bright Well Furnace, heating furnace advantages, characteristics and principles

Bright Well FurnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，is a kind of Bright Well Furnace manufactured by One-combustion energy saving。

1、Brief introduction of Bright Well Furnace

Bright Well FurnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It is a product series that integrates Metal heat treatment, Metal forging heating, Improve production efficiency, Metal melting and casting and Energy conservation and environmental protection，at the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，be loved by our customers.。

Bright Well Furnace

2、Bright Well Furnace structure

The Bright Well Furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. furnace chamber

A space for holding metallic materials for heating.

3. Radiation chamber

The heat load of the main place for Bright Well Furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Bright Well Furnace

3、Bright Well Furnace characteristics

The Bright Well Furnace features are as follows:

1. Efficient heating

The Bright Well Furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Bright Well Furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Stable and reliable

The Bright Well Furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Efficient heating

The Bright Well Furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Bright Well Furnace

4、Bright Well Furnace use

The purpose of Bright Well Furnace is introduced as follows:

1. Metal forging heating

The Bright Well Furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Bright Well Furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Bright Well Furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Bright Well Furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Bright Well Furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Bright Well Furnace

5、Bright Well Furnace price advantage

The Bright Well Furnace price is introduced as follows:

1. Manufacturer's strength

There are many manufacturers of products in Jinan, and the strength, technology and after-sales of each manufacturer are different, so the quotation for Bright Well Furnace is naturally different.

2. Model type

Specifications and models have a great influence on the price of Bright Well Furnace, so different specifications and models have different selling prices. Customers can reasonably select product specifications and models according to their own needs, so that products can meet their own required standards in terms of specifications and prices.

3. product costs

A Bright Well Furnace needs to spend a lot of manufacturing costs from research and development to production to sales, including raw material costs, technical costs, labor costs, etc. The higher the manufacturing cost, the higher the price will be.

4. marketing channel

What kind of sales methods manufacturers have has an intuitive impact on product prices. If it is a direct selling manufacturer, the manufacturer sells directly to customers, and there is no intermediate price difference, which can benefit customers to a greater extent.

5. mass discrepancy

Quality is an important and fundamental factor that affects the price of Bright Well Furnace. In the final analysis, its price depends on its quality. Usually, Bright Well Furnace with better quality will cost more, and such products have better effects, longer service life and more advanced technology. A Bright Well Furnace with a relatively general quality will cost less, have a shorter service life and have a relatively general use effect.

Bright Well Furnace

6、company strength

The company has many years of Bright Well Furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Bright Well Furnacemultifunctional, with functions such as hardening and tempering, quench, Casting heating, temper and anneal，is a Bright Well Furnace。