Introduction to SCR denitration, how much is the price of the SCR denitration?

SCR denitrationthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，it has been widely used in Gas power plant, metallurgy, building materials, cement plant, iron and steel plant and other industries，be loved by our customers.。The following is to introduce the SCR denitration:

1、Brief introduction of SCR denitration

SCR denitrationdelective catalytic reduction technology is an efficient flue gas denitrification technology.，features include Good selectivity, Stable operation, Environment friendly, High denitration efficiency and energy saving and environmental protection，the product looks atmospheric.，structure mainly includes: Flue gas mixing and distribution system, Catalyst reactor, Temperature control and monitoring system, control system, Catalyst supply system and so on，SCR denitrationThe structural design is simple, novel and special.，customizable。

SCR denitration

2、SCR denitration characteristics

The SCR denitration features are as follows:

1. energy saving and environmental protection

This technology can effectively reduce NOx emission in flue gas, reduce environmental pollution, and at the same time, it has stable operation and low energy consumption, which meets the requirements of energy saving and environmental protection.

2. Mature technology

After years of development and application, SCR denitration technology is very mature and has a wide application prospect.

3. Stable operation and stability

The SCR denitration technology runs stably and can meet the requirements of flue gas treatment under different working conditions.

4. high efficiency

Gate technology can effectively remove NOx from flue gas, and the denitrification efficiency can usually reach more than 90%.

5. Environmental protection

The final products of SCR denitration technology are harmless nitrogen and water vapor, which will not cause secondary pollution to the environment.

SCR denitration

3、SCR denitration structure

The SCR denitration structure is introduced as follows:

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

3. control system

The whole SCR denitration is automatically controlled, including the adjustment of reducing agent supply, flue gas flow and temperature, so as to ensure the stable operation of the system and achieve the expected denitrification effect.

4. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

5. Reactor

It is the core component of SCR denitration technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

SCR denitration

4、Advantages of SCR denitration principle

SCR denitrationthe principle is simple.Under the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.。

SCR denitration

5、SCR denitration function

SCR denitrationit has the functions of Improve energy efficiency, Improve working conditions, Promote sustainable development, environmental protection and Improve energy efficiency，is a common SCR denitration，it is widely used in iron and steel plant, coal-fired power station, Gas power plant, building materials, cement plant and other industries，it refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，is an advanced SCR denitration developed by our company in combination with the actual situation of the industry。

SCR denitration

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of SCR denitration, which produces SCR denitration with the advantage is Technology has been developed and applied for many years, and it is mature and stable. The SCR denitration has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR denitration technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR denitration technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR denitration technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR denitration technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR denitration technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR denitration technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

SCR denitrationthe main features are Mature and stable technology, Strong adaptability, Strong adaptability, Environmental protection and pollution-free and Stable operation，it can be used in coal-fired power station, Gas power plant, building materials, metallurgy, cement plant and other industries，Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR denitration can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR denitration technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Technology has been developed and applied for many years, and it is mature and stable. The SCR denitration has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR denitration technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the SCR denitration can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR denitration technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.。