What is a SCR low-temperature catalyst denitrification equipment? Introduction to the advantages, characteristics, and principles of the SCR flue gas denitrification

SCR low-temperature catalyst denitrification equipmentthat is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.，the product looks atmospheric.，The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low-temperature catalyst denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low-temperature catalyst denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Technology has been developed and applied for many years, and it is mature and stable. The SCR low-temperature catalyst denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low-temperature catalyst denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the SCR low-temperature catalyst denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR low-temperature catalyst denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low-temperature catalyst denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.。

1、Brief introduction of SCR low-temperature catalyst denitrification equipment

SCR low-temperature catalyst denitrification equipmentthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，It is a product series that integrates Meet the requirements of environmental protection, Promote sustainable development, Improve product quality, environmental protection and Improve product quality。

SCR low-temperature catalyst denitrification equipment

2、SCR low-temperature catalyst denitrification equipment HD picture

SCR low-temperature catalyst denitrification equipment specifications and models are complete, and customers can choose at will. High-definition pictures are available for customers' reference. Customers are welcome to visit our factory.。

SCR low-temperature catalyst denitrification equipment

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、SCR low-temperature catalyst denitrification equipment performance advantage

The advantages of SCR low-temperature catalyst denitrification equipment are as follows:

1. economic viability

The initial investment of this technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of SCR low-temperature catalyst denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, SCR low-temperature catalyst denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.

2. Wide applicability

SCR low-temperature catalyst denitrification equipment technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the SCR low-temperature catalyst denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

3. Mature and stable technology

SCR low-temperature catalyst denitrification equipment technology has been developed and applied for many years, and the technology is mature and stable. The SCR low-temperature catalyst denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the SCR low-temperature catalyst denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

4. Environmental friendliness

The by-products produced by SCR low-temperature catalyst denitrification equipment technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the SCR low-temperature catalyst denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

5. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the SCR low-temperature catalyst denitrification equipment technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the SCR low-temperature catalyst denitrification equipment technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

SCR low-temperature catalyst denitrification equipment

4、SCR low-temperature catalyst denitrification equipment structure

The SCR low-temperature catalyst denitrification equipment structure is introduced as follows:

1. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

2. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

3. control system

The whole SCR low-temperature catalyst denitrification equipment is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

SCR low-temperature catalyst denitrification equipment

5、SCR low-temperature catalyst denitrification equipment price concessions

The SCR low-temperature catalyst denitrification equipment price is introduced as follows:

1. quality factor

The quality of the product determines the production process and results. Good quality means that the raw materials of the product are better and the price will definitely be higher.

2. Model specification

Different customers need different output, different specifications, different product configurations, and their SCR low-temperature catalyst denitrification equipment prices are also different. The bigger the specification, the stronger the performance of the product and the higher the quotation.

3. raw material

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

4. Reasonable cost

Cost is a direct and fundamental factor that affects the price of SCR low-temperature catalyst denitrification equipment. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in SCR low-temperature catalyst denitrification equipment price, low in cost and low in price.

5. Brand strength

At present, there are various brands of SCR low-temperature catalyst denitrification equipment in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of SCR low-temperature catalyst denitrification equipment are different.

SCR low-temperature catalyst denitrification equipment

6、One-combustion energy saving's strength

The company has many years of SCR low-temperature catalyst denitrification equipment manufacturing experience, large scale and strong strength.。

One-combustion energy saving

SCR low-temperature catalyst denitrification equipmentusually used in iron and steel plant, cement plant, Gas power plant, building materials, metallurgy and other fields，the main structure includes control system, Catalyst reactor, Flue gas mixing and distribution system, Temperature control and monitoring system and Catalyst supply system。