Introduction to Low temperature SCR denitration system, how much is the price of the SCR denitration system?

Low temperature SCR denitration systemis an efficient, stable and environment-friendly flue gas denitrification technology.，Widely used inMeet the requirements of environmental protection,Improve product quality,Flue gas denitrification,Flue gas denitrification,environmental protection and so on，it is an ideal choice for customers to buy Low temperature SCR denitration system。

1、Brief introduction of Low temperature SCR denitration system

Low temperature SCR denitration systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，it is widely used in metallurgy, cement plant, coal-fired power station, iron and steel plant and Gas power plant，The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature SCR denitration system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature SCR denitration system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature SCR denitration system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature SCR denitration system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature SCR denitration system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature SCR denitration system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature SCR denitration system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.，Cheap and high quality。

Low temperature SCR denitration system

2、Low temperature SCR denitration system structure composition

The Low temperature SCR denitration system has the following structure

1. Reactor

It is the core component of Low temperature SCR denitration system technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

2. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

3. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

4. Reactor

It is the core component of Low temperature SCR denitration system technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

5. Catalytic reduction reaction

Under the action of catalyst, the reductant and NOx in flue gas undergo selective catalytic reduction reaction to generate nitrogen and water vapor.

Low temperature SCR denitration system

3、Low temperature SCR denitration system HD picture real shot

The panoramic shooting of One-combustion energy saving Low temperature SCR denitration system is shown as follows.。

Low temperature SCR denitration system

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Low temperature SCR denitration system video live broadcast

Speak directly with facts on the spot。

Low temperature SCR denitration system

As you can see from the live video.，One-combustion energy saving Commonly used inPromote sustainable development,Meet the requirements of environmental protection,Improve product quality,environmental protection,Meet the requirements of environmental protection and so on。

5、Introduction of advantages of Low temperature SCR denitration system

Low temperature SCR denitration systems have the following advantages.

1. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Low temperature SCR denitration system technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature SCR denitration system technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

2. Wide applicability

Low temperature SCR denitration system technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature SCR denitration system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

3. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature SCR denitration system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

4. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Low temperature SCR denitration system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

5. Environmental friendliness

The by-products produced by Low temperature SCR denitration system technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature SCR denitration system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.

Low temperature SCR denitration system

6、Low temperature SCR denitration system quotation

The Low temperature SCR denitration system price is introduced as follows:

1. Overall configuration

There is a direct connection between configuration and specifications. Generally speaking, with different specifications, its configuration scheme will be different, and the selection of products' materials and parts will be different, so the sales price of products will be different. It is not difficult to see that the configuration and price of Low temperature SCR denitration system are closely related. One-combustion energy saving has comprehensively measured the configuration and sales price of products when designing Low temperature SCR denitration system, which not only ensures that the functions of products can meet the actual needs of customers, but also can be in terms of price.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Product technology

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

4. market demand

The market has great fluctuation, which is also the key factor that leads to the imbalance and instability of supply and demand, and then leads to great changes in product prices. Only after a comprehensive understanding and investigation of the market can we make a reasonable decision, and then we can formulate a Low temperature SCR denitration system price sales plan that customers are satisfied with, and the main reason for its price rationality is also reflected here.

5. model

There are many specifications and models of Low temperature SCR denitration system in the market now. Under normal circumstances, the price of large-sized Low temperature SCR denitration system is definitely higher than that of small-sized Low temperature SCR denitration system.

Low temperature SCR denitration system

Low temperature SCR denitration systemthe main features are Mature and stable technology, Environment friendly, Environmental protection and pollution-free, Promote sustainable development and High denitration efficiency，delective catalytic reduction technology is an efficient flue gas denitrification technology.。