Introduction to Catalytic reduction flue gas denitrification system, SCR denitration advantages, characteristics and principles

Catalytic reduction flue gas denitrification systemthe full name is selective catalytic reduction technology, which is an advanced flue gas denitrification technology.，the advantage is There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Catalytic reduction flue gas denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Catalytic reduction flue gas denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Catalytic reduction flue gas denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Catalytic reduction flue gas denitrification system technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Catalytic reduction flue gas denitrification system technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Catalytic reduction flue gas denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.，it has been widely used in coal-fired power station, Gas power plant, cement plant, iron and steel plant, building materials and other industries，is a common Catalytic reduction flue gas denitrification system，is a Catalytic reduction flue gas denitrification system newly developed by One-combustion energy saving。The following is to introduce the Catalytic reduction flue gas denitrification system:

1、Brief introduction of Catalytic reduction flue gas denitrification system

Catalytic reduction flue gas denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.，can be customized according to user's needs.。

Catalytic reduction flue gas denitrification system

2、Catalytic reduction flue gas denitrification system HD real shot

Speak directly with facts on the spot。

Catalytic reduction flue gas denitrification system

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd that is, selective catalytic reduction technology is a technology used to reduce the emission of nitrogen oxides in flue gas.。

3、Advantages of Catalytic reduction flue gas denitrification system principle

Catalytic reduction flue gas denitrification systemthe principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.。

Catalytic reduction flue gas denitrification system

4、Catalytic reduction flue gas denitrification system function

Catalytic reduction flue gas denitrification systemit has the functions of environmental protection, Promote sustainable development, Improve energy efficiency, Improve working conditions and Improve working conditions，usually used in cement plant, building materials, Gas power plant, metallurgy, iron and steel plant and other fields，is a kind of high quality and low price Catalytic reduction flue gas denitrification system，delective catalytic reduction technology is an efficient flue gas denitrification technology.，the product looks atmospheric.。

Catalytic reduction flue gas denitrification system

5、How much is the Catalytic reduction flue gas denitrification system?

The Catalytic reduction flue gas denitrification system price is introduced as follows:

1. select a qualified person

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

2. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Catalytic reduction flue gas denitrification system have more or less differences in price.

3. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

4. company strength

There are many Catalytic reduction flue gas denitrification system manufacturers on the market. Different manufacturers spend different costs, such as material costs, labor costs, manufacturing costs, etc., and their products are quoted differently.

5. quality

Generally speaking, the higher the product quality, the higher the Catalytic reduction flue gas denitrification system price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

Catalytic reduction flue gas denitrification system

6、Company discount

Catalytic reduction flue gas denitrification system is a new type of SCR denitration introduced by Shandong yiran energy-saving environment protection co., ltd manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for coal-fired power station and other industries. Now consult One-combustion energy savingCatalytic reduction flue gas denitrification system, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Catalytic reduction flue gas denitrification systemUnder the action of catalyst, reducing agents (such as ammonia, urea, etc.) react with nitrogen oxides in flue gas to convert them into harmless nitrogen and water vapor.，is a Catalytic reduction flue gas denitrification system，the product looks atmospheric.。