What is a Industrial quenching furnace denitrification system? Introduction to the advantages and characteristics of the SCR flue gas denitrification

Industrial quenching furnace denitrification systemdelective catalytic reduction technology is an efficient flue gas denitrification technology.，Widely used inFlue gas denitrification,Promote sustainable development,Flue gas denitrification,Meet the requirements of environmental protection,Improve product quality and so on，is a popular Industrial quenching furnace denitrification system，features include High denitration efficiency, Mature and stable technology, Economically feasible, Environmental protection and pollution-free and Stable operation，The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Industrial quenching furnace denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Industrial quenching furnace denitrification system technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Industrial quenching furnace denitrification system technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Industrial quenching furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.。

1、Brief introduction of Industrial quenching furnace denitrification system

Industrial quenching furnace denitrification systemis an efficient, stable and environment-friendly flue gas denitrification technology.。

Industrial quenching furnace denitrification system

2、Industrial quenching furnace denitrification system principle

Industrial quenching furnace denitrification systemthe principle is simple.Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.。

Industrial quenching furnace denitrification system

3、Introduction of advantages of Industrial quenching furnace denitrification system

Industrial quenching furnace denitrification systems have the following advantages.

1. High efficiency denitration capacity

Gate is famous for its high efficiency of denitration, which can usually reach more than 90% denitration efficiency. This means that the Industrial quenching furnace denitrification system technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability mainly benefits from the promotion of catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.

2. Intelligent control and convenience of operation

The Industrial quenching furnace denitrification system has gradually realized intelligent control. By integrating advanced control system and sensor technology, the Industrial quenching furnace denitrification system can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.

3. Mature and stable technology

Industrial quenching furnace denitrification system technology has been developed and applied for many years, and the technology is mature and stable. The Industrial quenching furnace denitrification system has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Industrial quenching furnace denitrification system technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.

4. Diversity and high efficiency of catalysts

There are many kinds of catalysts used in the Industrial quenching furnace denitrification system technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at low temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Industrial quenching furnace denitrification system technology to maintain high efficiency of denitration in a wider temperature range and more complex flue gas conditions.

5. Wide applicability

Industrial quenching furnace denitrification system technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Industrial quenching furnace denitrification system technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.

Industrial quenching furnace denitrification system

4、Structural characteristics of Industrial quenching furnace denitrification system

The Industrial quenching furnace denitrification system has the following structure

1. Reducing agent storage and supply system

Used to store and supply reducing agent (such as ammonia or urea solution) to the reactor.

2. Reactor

It is the core component of Industrial quenching furnace denitrification system technology, and it is equipped with catalyst to promote the chemical reaction between reductant and NOx.

3. control system

The whole Industrial quenching furnace denitrification system is automatically controlled to ensure the stable operation of the system and achieve the expected denitration effect.

4. Flue gas mixing and distribution system

Ensure that the flue gas and reducing agent are fully mixed in the reactor to improve the denitrification efficiency.

5. Reducing agent supply

Reducing agents such as liquid pure ammonia or ammonia water (aqueous solution of ammonia) are evaporated and mixed with diluted air or flue gas.

Industrial quenching furnace denitrification system

5、Industrial quenching furnace denitrification system function

Industrial quenching furnace denitrification systemmultifunctional, with functions such as Improve energy efficiency, Improve working conditions, environmental protection, Improve working conditions and environmental protection，Environment friendly,Less secondary pollution,Strong adaptability,Promote sustainable development,Mature technology，is a Industrial quenching furnace denitrification system，the principle is simple.Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，is an advanced Industrial quenching furnace denitrification system developed by our company in combination with the actual situation of the industry。

Industrial quenching furnace denitrification system

6、One-combustion energy saving's strength

The company has many years of Industrial quenching furnace denitrification system manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Industrial quenching furnace denitrification systemat work,Catalysts are used to promote the selective catalytic reduction reaction between reducing agents (such as ammonia and urea) and NOx in flue gas. Under the action of catalyst, the reductant preferentially reacts with NOx to generate harmless nitrogen and water vapor, but hardly reacts with oxygen in flue gas. This chemical reaction is usually carried out in the temperature range of 200-450℃, and the specific reaction temperature depends on the type of catalyst selected.，multifunctional, with functions such as Promote sustainable development, Improve energy efficiency, Improve working conditions, Promote sustainable development and Improve energy efficiency。