What is a Low temperature catalyst furnace external flue gas denitrification equipment? SCR flue gas denitrification specifications, models, and parameters

Low temperature catalyst furnace external flue gas denitrification equipmentit refers to the process of removing nitrogen oxides from flue gas to reduce environmental pollution. NOx is a pollutant harmful to the atmospheric environment, which has strong irritation and toxicity, and will lead to environmental problems such as acid rain and photochemical smog, and also endanger human health. The main principle of flue gas denitrification technology is to reduce NOx to nitrogen and water by adding appropriate reducing agent or catalyst in the combustion process or flue gas treatment system, so as to reduce NOx emission.，the main features are energy saving and environmental protection, Promote sustainable development, Environmental protection and pollution-free, Efficient denitration and Strong adaptability，Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst furnace external flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst furnace external flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst furnace external flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst furnace external flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.、The technology is suitable for many industries and processes, such as coal-fired power plants, iron and steel smelting, cement production and so on. These industries will produce a large number of NOx emissions in the production process, and the Low temperature catalyst furnace external flue gas denitrification equipment technology can provide effective denitrification solutions for them. In addition, the gate technology can be adjusted and optimized according to different flue gas components and emission requirements to meet different denitration requirements.、The initial investment of technology may be high, but in the long run, its economic feasibility is remarkable. The high-efficiency denitration ability of Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the environmental emission cost of enterprises and avoid fines and legal risks due to illegal emissions. In addition, Low temperature catalyst furnace external flue gas denitrification equipment technology can also reduce operating costs and improve the economic benefits of enterprises by recycling heat energy.，Ammonia gas or other suitable reducing agent (such as urea aqueous solution) is sprayed into the flue gas upstream of the catalyst at high temperature. Under the action of catalyst, the reducing agent selectively reacts with nitrogen oxides (NOx) in flue gas to generate pollution-free nitrogen and water vapor. Because NH3 is selective, it only reacts with NOx and basically does not react with O2, so this technology is called selective catalytic reduction denitrification.，it is widely used in cement plant, metallurgy, iron and steel plant, coal-fired power station and Gas power plant。The following is to introduce the Low temperature catalyst furnace external flue gas denitrification equipment:

1、Brief introduction of Low temperature catalyst furnace external flue gas denitrification equipment

Low temperature catalyst furnace external flue gas denitrification equipmentis an efficient, stable and environment-friendly flue gas denitrification technology.，The structure is novel, special, advanced, reasonable and scientific.，the main structure includes Temperature control and monitoring system, control system, Catalyst supply system, Flue gas mixing and distribution system and Catalyst reactor，it has the functions of Promote sustainable development, Improve energy efficiency, environmental protection, Improve energy efficiency and Promote sustainable development，the advantage is The by-products produced by the technology are mainly nitrogen and water vapor, which are harmless to the environment and will not cause secondary pollution. Compared with the traditional wet flue gas denitrification technology, the Low temperature catalyst furnace external flue gas denitrification equipment technology does not need to use a lot of water resources and will not produce pollutants such as wastewater, which is more in line with the requirements of environmental protection and sustainable development.、Technology has been developed and applied for many years, and it is mature and stable. The Low temperature catalyst furnace external flue gas denitrification equipment has high reliability and stability, and can maintain stable denitrification efficiency under various working conditions. In addition, the Low temperature catalyst furnace external flue gas denitrification equipment technology has good adaptability and adjustability, and can be adjusted and optimized according to different flue gas components and emission requirements.、It is famous for its high-efficiency denitration ability, which can usually reach more than 90% denitration efficiency. This means that the Low temperature catalyst furnace external flue gas denitrification equipment technology can significantly reduce the concentration of nitrogen oxides (NOx) in flue gas and make it meet strict environmental protection emission standards. This high-efficiency denitration ability is mainly due to the promotion of the catalyst, which makes the chemical reaction between reductant and NOx more rapid and thorough.、Intelligent control is gradually realized. By integrating advanced control system and sensor technology, the Low temperature catalyst furnace external flue gas denitrification equipment can monitor the composition and emission concentration of flue gas in real time, and automatically adjust the injection amount of reductant and the active state of catalyst to ensure the stability and reliability of denitrification efficiency.、There are many kinds of catalysts used in the technology, including vanadium-based catalysts and titanium-based catalysts, which can promote the chemical reaction between reductant and NOx at a lower temperature. At the same time, the active components and carrier materials of the catalyst are constantly being developed and improved to improve its catalytic efficiency and service life. This enables the Low temperature catalyst furnace external flue gas denitrification equipment technology to maintain efficient denitrification capability in a wider temperature range and more complex flue gas conditions.，Cheap and high quality。

Low temperature catalyst furnace external flue gas denitrification equipment

2、Low temperature catalyst furnace external flue gas denitrification equipment function

Low temperature catalyst furnace external flue gas denitrification equipmentit has the functions of Improve working conditions, environmental protection, Improve energy efficiency, environmental protection and Improve working conditions，it is mainly composed of Temperature control and monitoring system, Catalyst reactor, Flue gas mixing and distribution system, control system and Catalyst supply system。

Low temperature catalyst furnace external flue gas denitrification equipment

3、Low temperature catalyst furnace external flue gas denitrification equipment explanation video

On-site aerial photography of Low temperature catalyst furnace external flue gas denitrification equipment。

Low temperature catalyst furnace external flue gas denitrification equipment

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd it has the characteristics of Promote sustainable development, Stable operation, Stable operation, Mature and stable technology and Mature technology。

4、Low temperature catalyst furnace external flue gas denitrification equipment application

Low temperature catalyst furnace external flue gas denitrification equipmentIt is a product series that integrates environmental protection, Improve product quality, Promote sustainable development, Flue gas denitrification and Improve product quality，is an advanced Low temperature catalyst furnace external flue gas denitrification equipment developed by our company in combination with the actual situation of the industry。

Low temperature catalyst furnace external flue gas denitrification equipment

5、Low temperature catalyst furnace external flue gas denitrification equipment price concessions

The Low temperature catalyst furnace external flue gas denitrification equipment price is introduced as follows:

1. technology content

Different manufacturers have different advanced technologies, different production processes and different performances, and the price difference is naturally quite large.

2. raw material

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

3. Configuration level

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

4. manufacturing cost

If the cost of the product is high, the selling price of the product will be high, so the cost input is an important factor that causes the price change of the Low temperature catalyst furnace external flue gas denitrification equipment.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Low temperature catalyst furnace external flue gas denitrification equipment

6、Company preferential activities

Low temperature catalyst furnace external flue gas denitrification equipment is a new type of SCR flue gas denitrification introduced by One-combustion energy saving manufacturer, which has a wide range of applications, complete structural design and high working efficiency. It is an ideal equipment for building materials and other industries. Now consult One-combustion energy savingProduction and processing的Low temperature catalyst furnace external flue gas denitrification equipment, you can enjoy the discount, and there are many activities for you, such as full reduction and full reduction。

One-combustion energy saving

Low temperature catalyst furnace external flue gas denitrification equipmentit has been widely used in coal-fired power station, cement plant, metallurgy, Gas power plant, iron and steel plant and other industries，It has a wide range of uses, and is often used inMeet the requirements of environmental protection,environmental protection,Promote sustainable development,Flue gas denitrification,Improve product quality and so on，it is mainly composed of Catalyst supply system, Catalyst reactor, control system, Temperature control and monitoring system and Flue gas mixing and distribution system，This productSimple structure and advanced technology.。