Introduction of Car mold preheating furnace
Car mold preheating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。
1、Brief introduction of Car mold preheating furnace
Car mold preheating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the advantage is Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is based on One-combustion energy saving is carefully developed by One-combustion energy saving combined with advanced technology。
Car mold preheating furnace
2、Introduction of advantages of Car mold preheating furnace
Car mold preheating furnaces have the following advantages.
- Extend the service life of equipment
- clean energy
- Multiple fuel options
- Efficient combustion
- Rapid temperature rise
The Car mold preheating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.
Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.
Although the Car mold preheating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.
The Car mold preheating furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.
The Car mold preheating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.
Car mold preheating furnace
3、Car mold preheating furnace structure composition
The Car mold preheating furnace structure is introduced as follows:
- furnace chamber
- ventilation system
- Waste heat recovery system
- Radiation chamber
- Waste heat recovery system
A space for holding metallic materials for heating.
Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.
Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.
The heat load of the main place for Car mold preheating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.
Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.
Car mold preheating furnace
4、Car mold preheating furnace characteristics
The Car mold preheating furnace features are as follows:
- Strong adaptability
- Stable and reliable
- Efficient heating
- energy saving and environmental protection
- Easy to control
The Car mold preheating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.
The Car mold preheating furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.
The Car mold preheating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.
As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.
By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.
Car mold preheating furnace
5、How much is the Car mold preheating furnace?
The Car mold preheating furnace price is introduced as follows:
- Product configuration difference
- technology content
- mass discrepancy
- Brand strength
- product function
The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.
The more advanced the technology, the higher the price will be, otherwise the equipment price will be low, and users must pay attention to whether their own technology meets the production requirements when purchasing equipment.
The quality of the Car mold preheating furnace is the key factor that affects its price. The manufacturer of high-quality products has high cost in production and high product performance, which can bring higher economic benefits to customers. Because the manufacturer of high-quality products has high production investment, the manufacturer is on the high side when positioning the Car mold preheating furnace price.
At present, there are various brands of Car mold preheating furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Car mold preheating furnace are different.
The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.
Car mold preheating furnace
6、One-combustion energy saving service
Our company will not only provide customers with excellent quality Car mold preheating furnace, but also choose a series of high-quality services such as appropriate specifications and models according to their actual needs.。
One-combustion energy saving
Car mold preheating furnacethe main features are Strong adaptability, Easy to control, Easy to maintain, energy saving and environmental protection and Strong adaptability，Commonly used inImprove production efficiency,Metal heat treatment,Metal tempering,Improve production efficiency,Metal melting and casting and so on。
