What is a Chain belt quenching furnace?

Chain belt quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。The following is to introduce the Chain belt quenching furnace:

1、Brief introduction of Chain belt quenching furnace

Chain belt quenching furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it has the functions of heat treatment, Casting heating, anneal, quench and temper，is developed and improved by One-combustion energy saving。

Chain belt quenching furnace

2、Chain belt quenching furnace application

Chain belt quenching furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Chain belt quenching furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Improve production efficiency

The Chain belt quenching furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Chain belt quenching furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal tempering

By properly heating and cooling the metal material, the Chain belt quenching furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Chain belt quenching furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Chain belt quenching furnace

3、Functional advantages of Chain belt quenching furnace

Chain belt quenching furnaces have the following advantages.

1. Multiple fuel options

Although the Chain belt quenching furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

2. Efficient combustion

The Chain belt quenching furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Rapid temperature rise

The Chain belt quenching furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

4. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

5. Wide application range

The Chain belt quenching furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Chain belt quenching furnace

4、Structural advantages of Chain belt quenching furnace

The Chain belt quenching furnace has the following structure

1. Radiation chamber

The heat load of the main place for Chain belt quenching furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Chain belt quenching furnace

5、Video analysis of Chain belt quenching furnace

On-site aerial photography of Chain belt quenching furnace。

Chain belt quenching furnace

As you can see from the live video.，One-combustion energy saving the product looks atmospheric.。

6、Chain belt quenching furnace video detail

The following is the live video of Chain belt quenching furnace designed and produced by One-combustion energy saving for users, from which we can see the The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs. of One-combustion energy savingChain belt quenching furnace.。

Chain belt quenching furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd is a kind of high quality and low price Chain belt quenching furnace。

Chain belt quenching furnacethe main features are energy-efficient, Stable and reliable, Easy to maintain, energy-efficient and Strong adaptability，is a common Chain belt quenching furnace，at work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。