Introduction and advantages of Rotary bottom heat treatment heating furnace

Rotary bottom heat treatment heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，features include Easy to maintain, energy-efficient, energy saving and environmental protection, Easy to control and energy-efficient，The overall structural design is relatively simple and compact.，it has the structure of ventilation system, combustor, ventilation system, ventilation system and Radiation chamber，be loved by our customers.。

1、Brief introduction of Rotary bottom heat treatment heating furnace

Rotary bottom heat treatment heating furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a popular Rotary bottom heat treatment heating furnace，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，can be customized according to user's needs.。

Rotary bottom heat treatment heating furnace

2、Rotary bottom heat treatment heating furnace advantage

The advantages of Rotary bottom heat treatment heating furnace are as follows:

1. Extend the service life of equipment

The Rotary bottom heat treatment heating furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Intelligent control

The Rotary bottom heat treatment heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. Improve product quality

Because the Rotary bottom heat treatment heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Multiple fuel options

Although the Rotary bottom heat treatment heating furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the Rotary bottom heat treatment heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Rotary bottom heat treatment heating furnace

3、Rotary bottom heat treatment heating furnace use

The purpose of Rotary bottom heat treatment heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Rotary bottom heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal tempering

By properly heating and cooling the metal material, the Rotary bottom heat treatment heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

3. Metal heat treatment

In addition to forging heating, Rotary bottom heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Rotary bottom heat treatment heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary bottom heat treatment heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Rotary bottom heat treatment heating furnace

4、Rotary bottom heat treatment heating furnace function

Rotary bottom heat treatment heating furnacemultifunctional, with functions such as heat treatment, Forging heating, quench, Casting heating and temper。

Rotary bottom heat treatment heating furnace

5、Rotary bottom heat treatment heating furnace price consultation

The Rotary bottom heat treatment heating furnace price is introduced as follows:

1. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Rotary bottom heat treatment heating furnace price is affected by the configuration, and the price varies.

2. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Rotary bottom heat treatment heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Rotary bottom heat treatment heating furnace price can meet the purchasing needs of customers.

3. Company size

There are many manufacturers of products in Shandong(Province), and the strength, technology and after-sales of each manufacturer are different, so the quotation for Rotary bottom heat treatment heating furnace is naturally different.

4. Brand strength

At present, there are various brands of Rotary bottom heat treatment heating furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Rotary bottom heat treatment heating furnace are different.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Rotary bottom heat treatment heating furnace

6、One-combustion energy saving's strength

The company has many years of Rotary bottom heat treatment heating furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Rotary bottom heat treatment heating furnaceat the start of the operation,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，widely used in aerospace, building materials, electron, chemical industry, heat treatment and other fields。