Brief introduction and advantages of Full fiber trolley forging furnace

Full fiber trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is an ideal choice for customers to buy Full fiber trolley forging furnace。

1、Brief introduction of Full fiber trolley forging furnace

Full fiber trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，It has a wide range of uses, including Energy conservation and environmental protection, Improve production efficiency, Metal tempering, Improve production efficiency and Metal forging heating，is an advanced Full fiber trolley forging furnace developed by our company in combination with the actual situation of the industry。

Full fiber trolley forging furnace

2、Full fiber trolley forging furnace introduction video

The following is the live video of Full fiber trolley forging furnace designed and produced by One-combustion energy saving for users, from which we can see the Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace. of One-combustion energy savingproduction-manufacturing的Full fiber trolley forging furnace.。

Full fiber trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the main features are energy-efficient, energy-efficient, Stable and reliable, energy saving and environmental protection and Easy to maintain。

3、Full fiber trolley forging furnace customer scene picture

Full fiber trolley forging furnace are widely used. The following is a multi-directional display diagram of Full fiber trolley forging furnace, and the details are full of quality and intelligence.。

Full fiber trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Full fiber trolley forging furnace characteristics

Full fiber trolley forging furnace has the following characteristics

1. Strong adaptability

The Full fiber trolley forging furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Efficient heating

The Full fiber trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Full fiber trolley forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

5. Easy to control

The combustion system and ventilation system of the Full fiber trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Full fiber trolley forging furnace

5、Full fiber trolley forging furnace use

The purpose of Full fiber trolley forging furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Full fiber trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Energy conservation and environmental protection

The Full fiber trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Full fiber trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Full fiber trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Full fiber trolley forging furnace

6、Full fiber trolley forging furnace price concessions

The Full fiber trolley forging furnace price is introduced as follows:

1. Low cost of raw materials

When the Full fiber trolley forging furnace is produced, the materials selected by different manufacturers will be different. Some manufacturers use high-quality materials, and the price will be relatively high, while some manufacturers use ordinary materials, and the price will be lower.

2. Parameter size

There are various specifications and models of Full fiber trolley forging furnace, and the performance of different specifications and models is quite different. Customers should choose products with appropriate specifications and models according to the actual situation.

3. regional advantages

The consumption level will be different in different regions. When pricing equipment, many manufacturers often set the price according to the consumption level of the region. If the consumption level is high, the price will be correspondingly high, otherwise, the price will be very low.

4. market demand

If there is a large demand for Full fiber trolley forging furnace in the market, the price of Full fiber trolley forging furnace will naturally become higher. On the contrary, if the supply of this product exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will become lower.

5. sales mode

One-combustion energy saving Full fiber trolley forging furnace manufacturer is a specialized manufacturer of Full fiber trolley forging furnace, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Full fiber trolley forging furnace price is also low.

Full fiber trolley forging furnace

Full fiber trolley forging furnaceThe high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。