What is a Continuous bright heat treatment furnace? Introduction to the Working Principle of heating furnace

Continuous bright heat treatment furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The structural design is more advanced and reasonable.，structure mainly includes: ventilation system, recovery of waste heat, convection chamber, combustor, furnace chamber and so on，support customization。The following is to introduce the Continuous bright heat treatment furnace:

1、Brief introduction of Continuous bright heat treatment furnace

Continuous bright heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of normalizing, hardening and tempering, heat treatment, Forging heating and quench，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

Continuous bright heat treatment furnace

2、Continuous bright heat treatment furnace principle

Continuous bright heat treatment furnaceat work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the product looks atmospheric.，it has the characteristics of Easy to control, Stable and reliable, energy-efficient, Strong adaptability and energy saving and environmental protection。

Continuous bright heat treatment furnace

3、Continuous bright heat treatment furnace use

The purpose of Continuous bright heat treatment furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Continuous bright heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Continuous bright heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Energy conservation and environmental protection

The Continuous bright heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal forging heating

The Continuous bright heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Metal tempering

By properly heating and cooling the metal material, the Continuous bright heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Continuous bright heat treatment furnace

4、Continuous bright heat treatment furnace real shot picture

The omni-directional high-definition real shot of the Continuous bright heat treatment furnace is shown as follows to meet the purchase needs of our customers.。

Continuous bright heat treatment furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Continuous bright heat treatment furnace introduction video

On-site aerial photography of Continuous bright heat treatment furnace。

Continuous bright heat treatment furnace

As you can see from the live video.，One-combustion energy saving in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Continuous bright heat treatment furnaceNatural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，it is widely used in Machinery manufacturing, machinery, electron, war industry and chemical industry，is a Continuous bright heat treatment furnace。