Introduction to Quenching heat treatment furnace and heating furnace structure principle

Quenching heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，Simple structure and advanced technology.，it has the structure of ventilation system, combustor, ventilation system, Radiation chamber and convection chamber，is a Quenching heat treatment furnace，Strong adaptability,Easy to control,Strong adaptability,Easy to control,Easy to maintain，has been favored by more and more customers.。The following is to introduce the Quenching heat treatment furnace:

1、Brief introduction of Quenching heat treatment furnace

Quenching heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it has the functions of Casting heating, heat treatment, anneal, normalizing and temper，it can be used in building materials, shipping, electron, light industry, automobile and other industries，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，It can be used for Metal heat treatment, Improve production efficiency, Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency and so on。

Quenching heat treatment furnace

2、Quenching heat treatment furnace principle

Quenching heat treatment furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，Mainly used forMetal forging heating,Energy conservation and environmental protection,Metal heat treatment,Metal melting and casting andMetal tempering，it is widely used in material, aerospace, surface treatment, Machinery manufacturing, light industry and other industries。

Quenching heat treatment furnace

3、Quenching heat treatment furnace characteristics

The Quenching heat treatment furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Strong adaptability

The Quenching heat treatment furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

3. Efficient heating

The Quenching heat treatment furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Strong adaptability

The Quenching heat treatment furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Quenching heat treatment furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

Quenching heat treatment furnace

4、Quenching heat treatment furnace use

The purpose of Quenching heat treatment furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Quenching heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Quenching heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Quenching heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal heat treatment

In addition to forging heating, Quenching heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Quenching heat treatment furnace

5、Quenching heat treatment furnace function

Quenching heat treatment furnaceit has the functions of anneal, temper, heat treatment, quench and Forging heating，widely used in pharmacy, material, metallurgy, war industry, heat treatment and other fields，is designed by One-combustion energy saving with advanced technology。

Quenching heat treatment furnace

6、How to choose the right product manufacturer?

Choosing a suitable Quenching heat treatment furnace manufacturer requires comprehensive consideration of many aspects. First of all, we should examine the strength of manufacturers, including production capacity, R&D team and industry experience. Strong manufacturers can better ensure product supply and innovation ability. Secondly, product quality is the key, and it is evaluated by product certification, material selection and manufacturing process to ensure the durability of products. Product performance can not be ignored, so we should choose manufacturers with matching technical parameters, rich types and customized services according to actual needs. After-sales service is equally important. Professional and timely service team, perfect after-sales content and extensive service network can make users worry about nothing. In addition, market reputation is also an important reference. We can understand the reputation and status of manufacturers through customer evaluation, industry reputation and award-winning honor. Finally, it is necessary to analyze the price and cost performance, and on the premise of ensuring the quality and performance, choose a manufacturer with reasonable price and high cost performance, so as to purchase Quenching heat treatment furnace products that meet the demand and have good cost performance.。

One-combustion energy saving

Quenching heat treatment furnacemultifunctional, with functions such as hardening and tempering, Casting heating, normalizing, anneal and Forging heating，structure mainly includes: recovery of waste heat, ventilation system, combustor, convection chamber, Radiation chamber and so on，The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.。