What is a Automatic loading and unloading heat treatment furnace? Introduction to the advantages and characteristics of the heating furnace

Automatic loading and unloading heat treatment furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。The following is to introduce the Automatic loading and unloading heat treatment furnace:

1、Brief introduction of Automatic loading and unloading heat treatment furnace

Automatic loading and unloading heat treatment furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of heat treatment, temper, normalizing, Forging heating and quench，the main features are Easy to control, energy-efficient, Easy to maintain, Stable and reliable and energy saving and environmental protection。

Automatic loading and unloading heat treatment furnace

2、Automatic loading and unloading heat treatment furnace use

The purpose of Automatic loading and unloading heat treatment furnace is introduced as follows:

1. Metal heat treatment

In addition to forging heating, Automatic loading and unloading heat treatment furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic loading and unloading heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Automatic loading and unloading heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal forging heating

The Automatic loading and unloading heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Energy conservation and environmental protection

The Automatic loading and unloading heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Automatic loading and unloading heat treatment furnace

3、Structural characteristics of Automatic loading and unloading heat treatment furnace

The Automatic loading and unloading heat treatment furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. furnace chamber

A space for holding metallic materials for heating.

4. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Automatic loading and unloading heat treatment furnace

4、Automatic loading and unloading heat treatment furnace introduction video

You can buy Automatic loading and unloading heat treatment furnace according to your needs and show you product videos.。

Automatic loading and unloading heat treatment furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

5、Working principle of Automatic loading and unloading heat treatment furnace

Automatic loading and unloading heat treatment furnaceat work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，is a common Automatic loading and unloading heat treatment furnace，the product looks atmospheric.，support customization。

Automatic loading and unloading heat treatment furnace

6、One-combustion energy saving after-sales service

The stable development of a manufacturer depends not only on product quality, but also on after-sales. Therefore, besides paying attention to product quality and price, the after-sales service of the manufacturer also plays a very important role in the future product application. One-combustion energy saving provides "housekeeping" after-sales service, which is more intimate.。

One-combustion energy saving

Automatic loading and unloading heat treatment furnaceit has the functions of heat treatment, Casting heating, anneal, hardening and tempering and temper，the product looks beautiful.，The structural design is more advanced and reasonable.，it is mainly composed of ventilation system, Radiation chamber, combustor, convection chamber and ventilation system。