Introduction to Split type heat treatment heating furnace and forging furnace structure principle

Split type heat treatment heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，The overall structural design is relatively simple，it is mainly composed of furnace chamber, combustor, ventilation system, convection chamber and ventilation system，the product looks atmospheric.，features include Stable and reliable, Easy to maintain, Strong adaptability, energy-efficient and energy saving and environmental protection。The following is to introduce the Split type heat treatment heating furnace:

1、Brief introduction of Split type heat treatment heating furnace

Split type heat treatment heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The price is low and affordable。

Split type heat treatment heating furnace

2、Split type heat treatment heating furnace use

The purpose of Split type heat treatment heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Split type heat treatment heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Split type heat treatment heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal forging heating

The Split type heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Split type heat treatment heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Split type heat treatment heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Split type heat treatment heating furnace

3、Split type heat treatment heating furnace characteristics

The Split type heat treatment heating furnace features are as follows:

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. Easy to maintain

The structural design of the Split type heat treatment heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Split type heat treatment heating furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Strong adaptability

The Split type heat treatment heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Strong adaptability

The Split type heat treatment heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Split type heat treatment heating furnace

4、Split type heat treatment heating furnace principle

Split type heat treatment heating furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.。

Split type heat treatment heating furnace

5、Split type heat treatment heating furnace function

Split type heat treatment heating furnaceit has the functions of anneal, Casting heating, temper, normalizing and Forging heating，it is an ideal choice for customers to buy Split type heat treatment heating furnace。

Split type heat treatment heating furnace

6、How much is the Split type heat treatment heating furnace?

The Split type heat treatment heating furnace price is introduced as follows:

1. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. Less intermediate links

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

3. Model type

One-combustion energy saving is a manufacturer specializing in the production of different products, the Split type heat treatment heating furnace of various specifications and models manufactured are affordable, reliable in quality, good in performance and perfect after-sales, which is a good choice for everyone to buy Split type heat treatment heating furnace.

4. Configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Split type heat treatment heating furnace has a higher cost performance.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Split type heat treatment heating furnace

Split type heat treatment heating furnaceis a common Split type heat treatment heating furnace，widely used inchemical industry,heat treatment,metallurgy,building materials,material and other industries，It has a wide range of uses, including Metal tempering, Metal melting and casting, Improve production efficiency, Metal heat treatment and Metal heat treatment。