What is a Bright annealing furnace? Introduction to the advantages and characteristics of heating furnace functions

Bright annealing furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it has the functions of hardening and tempering, normalizing, anneal, anneal and hardening and tempering，is a kind of Bright annealing furnace manufactured by One-combustion energy saving。The following is to introduce the Bright annealing furnace:

1、Brief introduction of Bright annealing furnace

Bright annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is an ideal choice for customers to buy Bright annealing furnace。

Bright annealing furnace

2、Bright annealing furnace structure

The Bright annealing furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

3. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Bright annealing furnace

3、Working principle of Bright annealing furnace

Bright annealing furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.，the product looks beautiful.，support customization。

Bright annealing furnace

4、Bright annealing furnace characteristics

The Bright annealing furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Bright annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Easy to maintain

The structural design of the Bright annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Bright annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Bright annealing furnace

5、Bright annealing furnace performance advantage

Bright annealing furnaces have the following advantages.

1. Improve product quality

Because the Bright annealing furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Reduce operating costs

The efficient combustion and waste heat recovery system of the Bright annealing furnace can significantly reduce energy consumption, thus reducing operating costs.

3. easy to operate

The operation interface of the Bright annealing furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Multiple fuel options

Although the Bright annealing furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Wide application range

The Bright annealing furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Bright annealing furnace

Bright annealing furnacethe main structure includes Radiation chamber, recovery of waste heat, ventilation system, recovery of waste heat and furnace chamber，it has the functions of Forging heating, temper, Casting heating, heat treatment and normalizing，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。