Introduction to Fully automatic annealing furnace, introduction to forging furnace function advantages and characteristics

Fully automatic annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.，Mainly used forImprove production efficiency,Metal heat treatment,Metal melting and casting,Improve production efficiency andMetal tempering。

1、Brief introduction of Fully automatic annealing furnace

Fully automatic annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is a Fully automatic annealing furnace newly developed by One-combustion energy saving。

Fully automatic annealing furnace

2、Fully automatic annealing furnace characteristics

The Fully automatic annealing furnace features are as follows:

1. Easy to maintain

The structural design of the Fully automatic annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Fully automatic annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Strong adaptability

The Fully automatic annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The Fully automatic annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Fully automatic annealing furnace

3、Fully automatic annealing furnace function

Fully automatic annealing furnacemultifunctional, with functions such as hardening and tempering, quench, Casting heating, temper and anneal，The overall structural design is relatively simple and compact.，the main structure includes recovery of waste heat, furnace chamber, ventilation system, convection chamber and combustor。

Fully automatic annealing furnace

4、Physical picture of Fully automatic annealing furnace

There are many specifications and models of Fully automatic annealing furnace, which can be selected by users at will. The high-definition factory map is available for our customers to visit.。

Fully automatic annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Fully automatic annealing furnace field real shot

The following is the live video of Fully automatic annealing furnace designed and produced by One-combustion energy saving for users, from which we can see the Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality. of One-combustion energy savingproduction-manufacturing的Fully automatic annealing furnace.。

Fully automatic annealing furnace

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, and is often used inEnergy conservation and environmental protection,Metal forging heating,Metal heat treatment,Energy conservation and environmental protection,Improve production efficiency and so on。

6、Fully automatic annealing furnace characteristics

The Fully automatic annealing furnace features are as follows:

1. Efficient heating

The Fully automatic annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Fully automatic annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

3. Strong adaptability

The Fully automatic annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Stable and reliable

The Fully automatic annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Fully automatic annealing furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Fully automatic annealing furnace

Fully automatic annealing furnaceis a popular Fully automatic annealing furnace，It is a forging heating device using gas as fuel.。