Introduction to Fully automatic annealing industrial furnace and Forging furnace structure principle

Fully automatic annealing industrial furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，it is mainly composed of ventilation system, Radiation chamber, ventilation system, ventilation system and recovery of waste heat，it has the functions of heat treatment, normalizing, Forging heating, temper and hardening and tempering。The following is to introduce the Fully automatic annealing industrial furnace:

1、Brief introduction of Fully automatic annealing industrial furnace

Fully automatic annealing industrial furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，It is mostly used in Metal melting and casting, Metal tempering, Metal forging heating, Improve production efficiency, Metal forging heating, Metal tempering and so on，the product looks beautiful.，is a Fully automatic annealing industrial furnace，is designed by One-combustion energy saving with advanced technology。

Fully automatic annealing industrial furnace

2、Fully automatic annealing industrial furnace structure

The Fully automatic annealing industrial furnace structure is introduced as follows:

1. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. Radiation chamber

The heat load of the main place for Fully automatic annealing industrial furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Fully automatic annealing industrial furnace

3、Advantages of Fully automatic annealing industrial furnace principle

Fully automatic annealing industrial furnaceat the start of the operation,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，it has the characteristics of Strong adaptability, Easy to control, energy saving and environmental protection, Stable and reliable and Easy to maintain，be loved by our customers.。

Fully automatic annealing industrial furnace

4、Fully automatic annealing industrial furnace HD real picture

Exquisite design, excellent material selection, reliable quality and high-definition pictures for our customers to visit.。

Fully automatic annealing industrial furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Fully automatic annealing industrial furnace characteristics

Fully automatic annealing industrial furnace has the following characteristics

1. Easy to maintain

The structural design of the Fully automatic annealing industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Efficient heating

The Fully automatic annealing industrial furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Fully automatic annealing industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

Fully automatic annealing industrial furnace

6、Introduction of One-combustion energy saving Company

One-combustion energy saving has many years of experience in Fully automatic annealing industrial furnace production, and is a professional Fully automatic annealing industrial furnace manufacturer. With favorable Fully automatic annealing industrial furnace price, stable product quality, rich product series and perfect after-sales service system, the company strives to become an advanced Fully automatic annealing industrial furnace manufacturer in Jinan, Shandong province.。

One-combustion energy saving

Fully automatic annealing industrial furnaceIt can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the main features are Easy to control, Easy to maintain, Stable and reliable, energy saving and environmental protection and energy-efficient。