What is a Rotary annealing heat treatment furnace? Introduction to the principle of forging furnace structure

Rotary annealing heat treatment furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，the advantage is Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，the principle is simple.Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，it has the functions of temper, Forging heating, quench, anneal and Casting heating，was developed and designed by One-combustion energy saving。

1、Brief introduction of Rotary annealing heat treatment furnace

Rotary annealing heat treatment furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is mainly composed of combustor, convection chamber, Radiation chamber, ventilation system and ventilation system，the product looks beautiful.，Commonly used inEnergy conservation and environmental protection,Metal tempering,Metal forging heating,Metal tempering,Energy conservation and environmental protection and so on，is a popular Rotary annealing heat treatment furnace。

Rotary annealing heat treatment furnace

2、Rotary annealing heat treatment furnace function

Rotary annealing heat treatment furnaceit has the functions of heat treatment, hardening and tempering, heat treatment, Forging heating and quench，It is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，usually used in Machinery manufacturing, chemical industry, shipping, petroleum, automobile and other fields，Cheap and high quality。

Rotary annealing heat treatment furnace

3、Rotary annealing heat treatment furnace structure composition

The Rotary annealing heat treatment furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Radiation chamber

The heat load of the main place for Rotary annealing heat treatment furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. furnace chamber

A space for holding metallic materials for heating.

Rotary annealing heat treatment furnace

4、Rotary annealing heat treatment furnace application

Rotary annealing heat treatment furnaces have the following purposes.

1. Metal melting and casting

Although it is mainly used for forging heating, some types of Rotary annealing heat treatment furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

2. Metal forging heating

The Rotary annealing heat treatment furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Improve production efficiency

The Rotary annealing heat treatment furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

4. Metal tempering

By properly heating and cooling the metal material, the Rotary annealing heat treatment furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Energy conservation and environmental protection

The Rotary annealing heat treatment furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

Rotary annealing heat treatment furnace

5、Rotary annealing heat treatment furnace price concessions

The Rotary annealing heat treatment furnace price is introduced as follows:

1. technology

High-tech products need more advanced technology to support them, so products with higher performance will also lead to a general increase in their prices, and vice versa.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. Product configuration difference

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Rotary annealing heat treatment furnace has a higher cost performance.

4. regional difference

The consumption level in different regions is different, which directly affects the equipment cost investment. Generally speaking, the higher the consumption level, the higher the cost of production equipment, and the higher the cost investment, the higher the price naturally.

5. quality factor

The service life of products with excellent quality will be longer, and at the same time, such products are very high in science and technology, which will create higher benefits for customers and make the price generally high, which is the main reason for the high price.

Rotary annealing heat treatment furnace

6、One-combustion energy saving delivery site

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the Rotary annealing heat treatment furnace production process and production site, and gain favorable comments and recognition from customers.。

Rotary annealing heat treatment furnace

As you can see from the live video.One-combustion energy saving it has been widely used in light industry, material, pharmacy, aerospace, building materials and other industries。

Rotary annealing heat treatment furnaceThe high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，the product looks atmospheric.，multifunctional, with functions such as normalizing, temper, anneal, Casting heating and hardening and tempering。