Introduction to Kiln car trolley forging furnace, advantages, characteristics and principles of forging furnace

Kiln car trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.。

1、Brief introduction of Kiln car trolley forging furnace

Kiln car trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，The price is relatively low.，be of high quality。

Kiln car trolley forging furnace

2、Kiln car trolley forging furnace principle

Kiln car trolley forging furnacein the course of work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

Kiln car trolley forging furnace

3、Introduction of Kiln car trolley forging furnace characteristics

Kiln car trolley forging furnace has the following characteristics

1. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

2. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

3. Stable and reliable

The Kiln car trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

4. Efficient heating

The Kiln car trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Kiln car trolley forging furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

Kiln car trolley forging furnace

4、Kiln car trolley forging furnace function

Kiln car trolley forging furnacemultifunctional, with functions such as anneal, normalizing, Casting heating, hardening and tempering and quench，the main structure includes furnace chamber, convection chamber, convection chamber, ventilation system, combustor and so on，productThe overall structural design is relatively simple and compact.，it can be used in Machinery manufacturing, electron, light industry, automobile, aerospace and other industries，the product looks atmospheric.，it is an ideal choice for customers to buy Kiln car trolley forging furnace。

Kiln car trolley forging furnace

5、Structural characteristics of Kiln car trolley forging furnace

The Kiln car trolley forging furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Kiln car trolley forging furnace

6、Brief introduction of Kiln car trolley forging furnace

Kiln car trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Kiln car trolley forging furnace

Kiln car trolley forging furnacethe advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.，multifunctional, with functions such as temper, anneal, heat treatment, Forging heating and normalizing。