Introduction to Axial flow annealing furnace and forging furnace structure principle

Axial flow annealing furnaceIt is a forging heating device using gas as fuel.，energy-efficient,Easy to maintain,Easy to control,energy-efficient,energy saving and environmental protection，support customization。

1、Brief introduction of Axial flow annealing furnace

Axial flow annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it is widely used in war industry, building materials, aerospace, machinery, metallurgy and other industries。

Axial flow annealing furnace

2、Axial flow annealing furnace display

HD picture of One-combustion energy saving Axial flow annealing furnace,Stable and reliable。

Axial flow annealing furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Axial flow annealing furnace function

Axial flow annealing furnaceit has the functions of Forging heating, anneal, temper, heat treatment and quench。

Axial flow annealing furnace

4、Structural advantages of Axial flow annealing furnace

The Axial flow annealing furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. furnace chamber

A space for holding metallic materials for heating.

3. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Axial flow annealing furnace

5、Axial flow annealing furnace characteristics

The Axial flow annealing furnace features are as follows:

1. Efficient heating

The Axial flow annealing furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Axial flow annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

Natural gas is a kind of clean energy, which produces less waste gas and waste smoke after combustion and has little environmental pollution. At the same time, through wall regenerative combustion technology, flue gas waste heat recovery system and other technical means, the Axial flow annealing furnace further improves energy utilization efficiency and reduces energy consumption and emissions.

4. Strong adaptability

The Axial flow annealing furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Strong adaptability

The Axial flow annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Axial flow annealing furnace

6、How much is the Axial flow annealing furnace?

The Axial flow annealing furnace price is introduced as follows:

1. product quality

The condition of the product itself has a great influence on its price, and the cost of the product with excellent quality is higher, which will lead to the increase of the selling price of the product. Therefore, this is an important factor that causes the price fluctuation and change of the Axial flow annealing furnace.

2. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

3. Manufacturer scale

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

4. region

Different provinces and regions have different consumption levels, different market positioning and different prices.

5. Proper management mode

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

Axial flow annealing furnace

Axial flow annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it has the functions of Forging heating, hardening and tempering, Casting heating, normalizing and anneal，the product looks beautiful.。