What is a Quenching heat treatment industrial furnace? Introduction to the Working Principle of Forging furnace

Quenching heat treatment industrial furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.。

1、Brief introduction of Quenching heat treatment industrial furnace

Quenching heat treatment industrial furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，energy saving and environmental protection,Strong adaptability,Easy to control,Stable and reliable,Easy to maintain，it has the functions of quench, hardening and tempering, temper, quench and heat treatment，is a common Quenching heat treatment industrial furnace，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.。

Quenching heat treatment industrial furnace

2、Video analysis of Quenching heat treatment industrial furnace

On-site aerial photography of Quenching heat treatment industrial furnace。

Quenching heat treatment industrial furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.。

3、Quenching heat treatment industrial furnace principle

Quenching heat treatment industrial furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.。

Quenching heat treatment industrial furnace

4、Quenching heat treatment industrial furnace HD real shot

Speak directly with facts on the spot。

Quenching heat treatment industrial furnace

As you can see from the live video.，One-combustion energy saving It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

5、Introduction of Quenching heat treatment industrial furnace characteristics

Quenching heat treatment industrial furnace has the following characteristics

1. Easy to maintain

The structural design of the Quenching heat treatment industrial furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Quenching heat treatment industrial furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to control

The combustion system and ventilation system of the Quenching heat treatment industrial furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Strong adaptability

The Quenching heat treatment industrial furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

5. Efficient heating

The Quenching heat treatment industrial furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

Quenching heat treatment industrial furnace

6、Quenching heat treatment industrial furnace price

The Quenching heat treatment industrial furnace price is introduced as follows:

1. technology content

Each customer needs different products, wants to achieve different purposes, and has different product technical design. The higher or more advanced the technical requirements, the more the product cost will be, and the price will increase with the increase of cost. On the contrary, the price will be cheaper.

2. Different regions

Different provinces and regions have different consumption levels, different market positioning and different prices.

3. Brand strength

At present, there are various brands of Quenching heat treatment industrial furnace in Jinan. The performance, quality and after-sales of products under different brands are different, and the prices of Quenching heat treatment industrial furnace are different.

4. service

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Quenching heat treatment industrial furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Quenching heat treatment industrial furnace price can meet the purchasing needs of customers.

5. raw material

Different manufacturers have different material selection standards. The better the quality of the selected materials, the more expensive the products will be. On the contrary, the prices will be low. However, to avoid customers being deceived, compare several products of the same specification and model before deciding to purchase.

Quenching heat treatment industrial furnace

Quenching heat treatment industrial furnaceCommonly used inMetal tempering,Metal heat treatment,Metal forging heating,Improve production efficiency,Metal melting and casting and so on，the product looks beautiful.。