What is a Multi functional box furnace? Introduction to the advantages, characteristics, and principles of the forging furnace

Multi functional box furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，support customization。The following is to introduce the Multi functional box furnace:

1、Brief introduction of Multi functional box furnace

Multi functional box furnaceIt is a forging heating device using gas as fuel.，it can be used in aerospace, metallurgy, Household necessities, light industry, chemical industry and other industries，is a Multi functional box furnace。

Multi functional box furnace

2、Multi functional box furnace application

Multi functional box furnaces have the following purposes.

1. Improve production efficiency

The Multi functional box furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Multi functional box furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal forging heating

The Multi functional box furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

4. Metal heat treatment

In addition to forging heating, Multi functional box furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Multi functional box furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Multi functional box furnace

3、Multi functional box furnace characteristics

The Multi functional box furnace features are as follows:

1. Strong adaptability

The Multi functional box furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

2. Easy to control

The combustion system and ventilation system of the Multi functional box furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Strong adaptability

The Multi functional box furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Efficient heating

The Multi functional box furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Stable and reliable

The Multi functional box furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Multi functional box furnace

4、On-site real shot of Multi functional box furnace

The Multi functional box furnace has a beautiful appearance and atmosphere for our customers' reference.。

Multi functional box furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Multi functional box furnace principle

Multi functional box furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is a kind of Multi functional box furnace manufactured by One-combustion energy saving。

Multi functional box furnace

6、Structural characteristics of Multi functional box furnace

The Multi functional box furnace structure is introduced as follows:

1. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

2. Radiation chamber

The heat load of the main place for Multi functional box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

3. Radiation chamber

The heat load of the main place for Multi functional box furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. furnace chamber

A space for holding metallic materials for heating.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Multi functional box furnace

Multi functional box furnaceat the start of the operation,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，multifunctional, with functions such as Forging heating, quench, heat treatment, hardening and tempering and anneal。