What is a Environmentally friendly tube furnace? Introduction to the advantages and characteristics of the Forging furnace

Environmentally friendly tube furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，it is widely used inheat treatment,metallurgy,surface treatment,war industry,petroleum and other industries，the product looks beautiful.，structure mainly includes: convection chamber, Radiation chamber, Radiation chamber, ventilation system, ventilation system and so on，Environmentally friendly tube furnaceThe structure is novel, special, advanced, reasonable and scientific.，has been favored by more and more customers.。The following is to introduce the Environmentally friendly tube furnace:

1、Brief introduction of Environmentally friendly tube furnace

Environmentally friendly tube furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，multifunctional, with functions such as heat treatment, Forging heating, hardening and tempering, quench and temper，is designed by One-combustion energy saving with advanced technology。

Environmentally friendly tube furnace

2、Environmentally friendly tube furnace principle

Environmentally friendly tube furnaceHeat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，features include Strong adaptability, energy saving and environmental protection, Stable and reliable, Easy to control and Easy to maintain。

Environmentally friendly tube furnace

3、Environmentally friendly tube furnace application

The purpose of Environmentally friendly tube furnace is introduced as follows:

1. Metal forging heating

The Environmentally friendly tube furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal forging heating

The Environmentally friendly tube furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Environmentally friendly tube furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Environmentally friendly tube furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Environmentally friendly tube furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Environmentally friendly tube furnace

4、Environmentally friendly tube furnace display

One-combustion energy saving Environmentally friendly tube furnacethe product looks beautiful., the following is a panoramic shot of the Environmentally friendly tube furnace for your reference.。

Environmentally friendly tube furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Environmentally friendly tube furnace structure

The Environmentally friendly tube furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. furnace chamber

A space for holding metallic materials for heating.

3. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

Environmentally friendly tube furnace

6、One-combustion energy saving introduced

One-combustion energy saving, as one of the professional and powerful Environmentally friendly tube furnace manufacturers in Jinan, Shandong province, produces Environmentally friendly tube furnace with reliable quality, affordable price and perfect after-sales, which have been successfully practiced in many processing plants at home and abroad.。

One-combustion energy saving

Environmentally friendly tube furnaceit is mainly composed of combustor, convection chamber, recovery of waste heat, furnace chamber and Radiation chamber，Easy to control,energy saving and environmental protection,Strong adaptability,Easy to maintain,energy-efficient，it is widely used in Household necessities, pharmacy, material, Machinery manufacturing and automobile。