Introduction to Energy saving tube quenching furnace, introduction to Forging furnace function advantages and characteristics

Energy saving tube quenching furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the product looks atmospheric.，multifunctional, with functions such as heat treatment, Forging heating, hardening and tempering, temper and normalizing。The following is to introduce the Energy saving tube quenching furnace:

1、Brief introduction of Energy saving tube quenching furnace

Energy saving tube quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，is developed and improved by One-combustion energy saving。

Energy saving tube quenching furnace

2、Functional advantages of Energy saving tube quenching furnace

Energy saving tube quenching furnaces have the following advantages.

1. Extend the service life of equipment

The Energy saving tube quenching furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. Improve product quality

Because the Energy saving tube quenching furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Intelligent control

The Energy saving tube quenching furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

4. Reduce operating costs

The efficient combustion and waste heat recovery system of the Energy saving tube quenching furnace can significantly reduce energy consumption, thus reducing operating costs.

5. easy to operate

The operation interface of the Energy saving tube quenching furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Energy saving tube quenching furnace

3、Energy saving tube quenching furnace field real shot

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Energy saving tube quenching furnace

As you can see from the live video.，One-combustion energy saving the advantage is It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.。

4、Energy saving tube quenching furnace characteristics

Energy saving tube quenching furnace has the following characteristics

1. Easy to maintain

The structural design of the Energy saving tube quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Energy saving tube quenching furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Energy saving tube quenching furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the Energy saving tube quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Efficient heating

The Energy saving tube quenching furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Energy saving tube quenching furnace

5、Energy saving tube quenching furnace price

The Energy saving tube quenching furnace price is introduced as follows:

1. Manufacturer scale

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

2. Different regions

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Energy saving tube quenching furnace.

3. regional advantages

One-combustion energy savingShandong(Province), the transportation is convenient, and the corresponding cost of transporting Energy saving tube quenching furnace is low, which reduces the cost of selling Energy saving tube quenching furnace by manufacturers, and the price will also decrease.

4. mass discrepancy

Generally speaking, the higher the product quality, the higher the Energy saving tube quenching furnace price. A reasonable balance is made between quality and price, so that the comprehensive quality of the product can meet the customer's use standards and meet the basic needs of customers in terms of price.

5. raw material

The quality of material selection is one of the main factors that directly affect the Energy saving tube quenching furnace. If the quality of material selection is better, the price may be more expensive. Therefore, customers must first understand the quality of material selection before purchasing products, and then compare whether the quality and price match.

Energy saving tube quenching furnace

6、One-combustion energy saving delivery site

On-site aerial photography of Energy saving tube quenching furnace。

Energy saving tube quenching furnace

As you can see from the live video.One-combustion energy saving the product looks beautiful.。

Energy saving tube quenching furnaceIt can be used for Energy conservation and environmental protection, Improve production efficiency, Energy conservation and environmental protection, Improve production efficiency, Metal tempering, Metal heat treatment and so on，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of Casting heating, anneal, quench, Forging heating and heat treatment。