Introduction to Energy saving tube annealing furnace, introduction to Forging furnace advantages and characteristics

Energy saving tube annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，it has the functions of temper, heat treatment, anneal, anneal and hardening and tempering，the product looks beautiful.，Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.，usually used in material, pharmacy, heat treatment, electron, building materials and other fields。The following is to introduce the Energy saving tube annealing furnace:

1、Brief introduction of Energy saving tube annealing furnace

Energy saving tube annealing furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.，is a popular Energy saving tube annealing furnace，it is widely used in war industry, automobile, machinery, electron, surface treatment and other industries，be loved by our customers.。

Energy saving tube annealing furnace

2、Energy saving tube annealing furnace use

The purpose of Energy saving tube annealing furnace is introduced as follows:

1. Metal tempering

By properly heating and cooling the metal material, the Energy saving tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Improve production efficiency

The Energy saving tube annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Energy saving tube annealing furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Energy conservation and environmental protection

The Energy saving tube annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal tempering

By properly heating and cooling the metal material, the Energy saving tube annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Energy saving tube annealing furnace

3、Energy saving tube annealing furnace structure composition

The Energy saving tube annealing furnace structure is introduced as follows:

1. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Energy saving tube annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Energy saving tube annealing furnace

4、Working principle of Energy saving tube annealing furnace

Energy saving tube annealing furnaceat runtime,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，be loved by our customers.。

Energy saving tube annealing furnace

5、Energy saving tube annealing furnace function

Energy saving tube annealing furnaceit has the functions of Forging heating, Casting heating, heat treatment, normalizing and temper，is a popular Energy saving tube annealing furnace，it has been widely used in shipping, automobile, chemical industry, heat treatment, building materials and other industries，Structure consists of convection chamber, combustor, ventilation system, Radiation chamber, convection chamber and so on，This Energy saving tube annealing furnaceThe overall structural design is simple and novel.，features include Easy to control, energy saving and environmental protection, Strong adaptability, Stable and reliable and Easy to maintain。

Energy saving tube annealing furnace

Energy saving tube annealing furnaceis a Energy saving tube annealing furnace，it mainly includes ventilation system, Radiation chamber, recovery of waste heat, ventilation system and furnace chamber，multifunctional, with functions such as quench, anneal, heat treatment, quench and temper。