Introduction to Double car baking furnace, advantages, characteristics and principles of heating furnace

Double car baking furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the advantage is It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.，customizable。

1、Brief introduction of Double car baking furnace

Double car baking furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，the product looks atmospheric.，in the course of work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，is a popular Double car baking furnace，Simple structure and reliable operation.，generally, it is composed of ventilation system, Radiation chamber, furnace chamber, recovery of waste heat, convection chamber and other major components。

Double car baking furnace

2、Introduction of advantages of Double car baking furnace

Double car baking furnaces have the following advantages.

1. Efficient combustion

The Double car baking furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

2. easy to operate

The operation interface of the Double car baking furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Improve product quality

Because the Double car baking furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

4. Uniform heating

The Double car baking furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. Wide application range

The Double car baking furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Double car baking furnace

3、Structural advantages of Double car baking furnace

The Double car baking furnace has the following structure

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

3. Radiation chamber

The heat load of the main place for Double car baking furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

5. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

Double car baking furnace

4、Double car baking furnace introduction video

On-site aerial photography of Double car baking furnace。

Double car baking furnace

As you can see from the live video.，One-combustion energy saving It has a wide range of uses, including Energy conservation and environmental protection, Metal forging heating, Metal tempering, Improve production efficiency and Metal melting and casting。

5、Double car baking furnace function

Double car baking furnacemultifunctional, with functions such as Forging heating, heat treatment, anneal, quench and temper，The structure is novel, special, advanced, reasonable and scientific.，Structure consists of combustor, furnace chamber, ventilation system, convection chamber, recovery of waste heat and so on，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，It has a wide range of uses, and is often used inMetal tempering,Metal heat treatment,Metal forging heating,Improve production efficiency,Energy conservation and environmental protection and so on，is a kind of high quality and low price Double car baking furnace。

Double car baking furnace

6、How much is the Double car baking furnace?

The Double car baking furnace price is introduced as follows:

1. Product technology

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

2. Overall configuration

The higher the hardware configuration, the greater the product cost, so the sales price of such products will be higher. One-combustion energy saving pays special attention to the hardware configuration of products, so One-combustion energy saving Double car baking furnace has a higher cost performance.

3. geographical position

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Double car baking furnace.

4. market demand

If there is a large demand for Double car baking furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

5. Model specification

The same product, different specifications and models, the performance of the product is different, therefore, manufacturers need different costs in producing and manufacturing products, so the prices of different specifications and models are different, and customers should give priority to suitability when purchasing.

Double car baking furnace

Double car baking furnacemultifunctional, with functions such as normalizing, Casting heating, Forging heating, hardening and tempering and heat treatment，it is mainly composed of recovery of waste heat, ventilation system, convection chamber, Radiation chamber and ventilation system。