Introduction to Double car bright annealing furnace, introduction to heating furnace advantages and characteristics

Double car bright annealing furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the main features are energy-efficient, Easy to maintain, energy saving and environmental protection, Stable and reliable and Stable and reliable，has been favored by more and more customers.。

1、Brief introduction of Double car bright annealing furnace

Double car bright annealing furnaceIt is a forging heating device using gas as fuel.，it mainly includes Radiation chamber, ventilation system, combustor, furnace chamber and ventilation system，the product looks atmospheric.，is a popular Double car bright annealing furnace，can be customized according to user's needs.。

Double car bright annealing furnace

2、Introduction of Double car bright annealing furnace characteristics

Double car bright annealing furnace has the following characteristics

1. Stable and reliable

The Double car bright annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Strong adaptability

The Double car bright annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Double car bright annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Efficient heating

The Double car bright annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

5. Easy to maintain

The structural design of the Double car bright annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Double car bright annealing furnace

3、Double car bright annealing furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site productt operation, and helps customers to deeply understand the product production process and production site, and gain favorable comments and recognition from customers.。

Double car bright annealing furnace

As you can see from the live video.，One-combustion energy saving It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

4、Structural characteristics of Double car bright annealing furnace

The Double car bright annealing furnace has the following structure

1. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

2. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

3. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

4. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

5. Radiation chamber

The heat load of the main place for Double car bright annealing furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

Double car bright annealing furnace

5、Advantages of Double car bright annealing furnace principle

Double car bright annealing furnaceat work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Widely used in Improve production efficiency, Metal melting and casting, Energy conservation and environmental protection, Metal tempering and Metal heat treatment，The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.，the product looks atmospheric.，is an advanced Double car bright annealing furnace developed by our company in combination with the actual situation of the industry。

Double car bright annealing furnace

6、How much is the Double car bright annealing furnace?

The Double car bright annealing furnace price is introduced as follows:

1. company strength

The products manufactured by manufacturers of different scales are also different. Large-scale manufacturers have advanced production technology, the quality of products manufactured is reliable, and large-scale manufacturers have perfect after-sales service, which can provide greater protection for customers and the products manufactured are more cost-effective. Therefore, customers should try to choose large manufacturers to purchase.

2. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

3. product configuration

Products of the same style, different configurations, the product price is definitely different, therefore, the Double car bright annealing furnace price is affected by the configuration, and the price varies.

4. Quality advantages and disadvantages

The price of Double car bright annealing furnace is affected by the quality of products. Only when the products are of good quality can we create greater profits for customers and recover the costs for customers as soon as possible. However, products with good quality have a lot of investment in technology, manpower and time, so their prices are higher than those of ordinary products. On the contrary, the products of general quality are equal in effort and gain, and the sales price is also low. But there are exceptions. Many manufacturers often adopt the mode of small profits but quick turnover. If customers can choose products with high cost performance, it is a good choice for long-term investment.

5. select a qualified person

The higher the cost of materials, the higher the price will be. In the process of purchasing, customers need to make a detailed understanding of the materials selected for manufacturing products.

Double car bright annealing furnace

Double car bright annealing furnaceenergy-efficient,energy saving and environmental protection,Strong adaptability,Easy to maintain,Easy to control，the main structure includes recovery of waste heat, convection chamber, Radiation chamber, convection chamber, recovery of waste heat and so on，Double car bright annealing furnaceThe overall structural design is relatively simple。