What is a Segmented trolley forging heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Segmented trolley forging heating furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。

1、Brief introduction of Segmented trolley forging heating furnace

Segmented trolley forging heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，Widely used inMetal tempering,Metal heat treatment,Energy conservation and environmental protection,Improve production efficiency,Metal melting and casting and so on。

Segmented trolley forging heating furnace

2、Introduction of advantages of Segmented trolley forging heating furnace

Segmented trolley forging heating furnaces have the following advantages.

1. Improve product quality

Because the Segmented trolley forging heating furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

2. Intelligent control

The Segmented trolley forging heating furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

3. easy to operate

The operation interface of the Segmented trolley forging heating furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

4. Wide application range

The Segmented trolley forging heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Rapid temperature rise

The Segmented trolley forging heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

Segmented trolley forging heating furnace

3、Segmented trolley forging heating furnace use

The purpose of Segmented trolley forging heating furnace is introduced as follows:

1. Metal forging heating

The Segmented trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Energy conservation and environmental protection

The Segmented trolley forging heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Segmented trolley forging heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Improve production efficiency

The Segmented trolley forging heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal forging heating

The Segmented trolley forging heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Segmented trolley forging heating furnace

4、Segmented trolley forging heating furnace characteristics

The Segmented trolley forging heating furnace features are as follows:

1. Strong adaptability

The Segmented trolley forging heating furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. Easy to maintain

The structural design of the Segmented trolley forging heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

5. Efficient heating

The Segmented trolley forging heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Segmented trolley forging heating furnace

5、Segmented trolley forging heating furnace field real shot

Speak directly with facts on the spot。

Segmented trolley forging heating furnace

As you can see from the live video.，One-combustion energy saving it is widely used in Machinery manufacturing, pharmacy, material, chemical industry, surface treatment and other industries。

6、Segmented trolley forging heating furnace quotation

The Segmented trolley forging heating furnace price is introduced as follows:

1. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

2. Model type

One-combustion energy saving Segmented trolley forging heating furnace has various specifications and models, and the prices of different specifications and models are also different. The main difference lies in the different technologies used in the products and the different manufacturing costs. One-combustion energy saving We will regularly offer preferential prices for products of different specifications and models, and will combine the actual purchasing needs of customers to give more benefits, so that complete procurement can get more benefits

3. After-sales service level

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Segmented trolley forging heating furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Segmented trolley forging heating furnace price can meet the purchasing needs of customers.

4. Manufacturer's sales model

If there is no middleman to earn the difference, then the Segmented trolley forging heating furnace price will naturally decrease. One-combustion energy saving adopts the business model of "self-production and self-marketing" to sell products, thus realizing "one-on-one" sales, so the comprehensive price of our products is relatively high.

5. geographical position

There are differences in consumption levels in different regions, which directly affect the production and manufacturing costs of products. Generally speaking, the higher the consumption level, the higher the cost of producing products, and the higher the product cost, the higher the price naturally.

Segmented trolley forging heating furnace

Segmented trolley forging heating furnacethe main structure includes ventilation system, convection chamber, Radiation chamber, recovery of waste heat, combustor and so on，Segmented trolley forging heating furnaceSimple structure and reliable operation.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。