Introduction to Heating gas trolley furnace, introduction to forging furnace function advantages and characteristics

Heating gas trolley furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，it is widely used inMachinery manufacturing,machinery,light industry,Machinery manufacturing,automobile and other industries，is a Heating gas trolley furnace，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.。The following is to introduce the Heating gas trolley furnace:

1、Brief introduction of Heating gas trolley furnace

Heating gas trolley furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，energy saving and environmental protection,Strong adaptability,Stable and reliable,Easy to control,energy-efficient。

Heating gas trolley furnace

2、Heating gas trolley furnace structure

The Heating gas trolley furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The high-temperature flue gas discharged from the radiation chamber is used for convective heat transfer to further heat the metal materials.

Heating gas trolley furnace

3、Heating gas trolley furnace characteristics

The Heating gas trolley furnace features are as follows:

1. Efficient heating

The Heating gas trolley furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

2. Stable and reliable

The Heating gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Heating gas trolley furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

4. Easy to control

The combustion system and ventilation system of the Heating gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Easy to control

The combustion system and ventilation system of the Heating gas trolley furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Heating gas trolley furnace

4、Heating gas trolley furnace principle

Heating gas trolley furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，is developed and improved by One-combustion energy saving。

Heating gas trolley furnace

5、Heating gas trolley furnace function

Heating gas trolley furnacemultifunctional, with functions such as quench, normalizing, Forging heating, normalizing and heat treatment，It is a product series that integrates Improve production efficiency, Metal forging heating, Metal melting and casting, Metal tempering and Metal melting and casting，it is an ideal choice for customers to buy Heating gas trolley furnace。

Heating gas trolley furnace

6、Heating gas trolley furnace price

The Heating gas trolley furnace price is introduced as follows:

1. regional advantages

One-combustion energy saving has a geographical advantage, where the transportation is developed, the product transportation cost is low, and the price and consumption level are also low, which provides a good sales environment for Heating gas trolley furnace.

2. product configuration

The overall configuration has a great influence on the price. Generally speaking, the higher the configuration, the higher its cost input and the higher the selling price of the product, which is beyond doubt. One-combustion energy saving has made a comprehensive thinking on the overall configuration of products, and at the same time has strictly controlled the material selection and design of products, so the price of products with the same configuration can easily meet the actual purchasing needs of customers.

3. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

4. Manufacturer's strength

Although there are many manufacturers of products in Shandong(Province), there are certain differences in the scale and strength of each manufacturer. Some manufacturers are large in scale and strength, some are small in scale, and some manufacturers do not have their own production workshops and belong to middlemen. Relatively speaking, the prices of products formulated by middlemen are higher.

5. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

Heating gas trolley furnace

Heating gas trolley furnaceThe overall structural design is simple and novel.，the main structure includes Radiation chamber, recovery of waste heat, ventilation system, furnace chamber and furnace chamber，is a popular Heating gas trolley furnace，widely used inheat treatment,machinery,material,chemical industry,petroleum and other industries。