What is a Rail type trolley forging furnace? Introduction to the principle of forging furnace structure

Rail type trolley forging furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，is a kind of high quality and low price Rail type trolley forging furnace，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.，it is usually composed of convection chamber, furnace chamber, Radiation chamber, recovery of waste heat and convection chamber，This productThe structure is novel, special, advanced, reasonable and scientific.，has been favored by more and more customers.。

1、Brief introduction of Rail type trolley forging furnace

Rail type trolley forging furnaceIt is a forging heating device using gas as fuel.，features include energy-efficient, energy-efficient, Easy to control, Easy to maintain and energy saving and environmental protection。

Rail type trolley forging furnace

2、Rail type trolley forging furnace application

Rail type trolley forging furnaces have the following purposes.

1. Improve production efficiency

The Rail type trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Rail type trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Energy conservation and environmental protection

The Rail type trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal melting and casting

Although it is mainly used for forging heating, some types of Rail type trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

5. Metal heat treatment

In addition to forging heating, Rail type trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

Rail type trolley forging furnace

3、Video analysis of Rail type trolley forging furnace

On-site aerial photography of Rail type trolley forging furnace。

Rail type trolley forging furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。

4、Introduction of advantages of Rail type trolley forging furnace

Rail type trolley forging furnaces have the following advantages.

1. Wide application range

The Rail type trolley forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

2. Improve product quality

Because the Rail type trolley forging furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Rail type trolley forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Uniform heating

The Rail type trolley forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

5. easy to operate

The operation interface of the Rail type trolley forging furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Rail type trolley forging furnace

5、Rail type trolley forging furnace price advantage

The Rail type trolley forging furnace price is introduced as follows:

1. select a qualified person

The quality of materials directly determines the cost. The worse the materials are, the lower the cost will be, and the cheaper the price will be. Of course, the materials are better and the cost is higher, so the overall quotation is naturally higher.

2. Service factor

There is a close relationship between service and price. High-quality service can not only avoid all worries in the process of product use, but also improve the overall strength and comprehensive credibility of manufacturers. In order to improve the service quality, One-combustion energy saving Rail type trolley forging furnace manufacturers provide comprehensive services for customers and products before, during and after sale, and at the same time make the price as favorable as possible to new and old customers, so that the Rail type trolley forging furnace price can meet the purchasing needs of customers.

3. Brand strength

At present, there are various brands of Rail type trolley forging furnace in Shandong(Province). The performance, quality and after-sales of products under different brands are different, and the prices of Rail type trolley forging furnace are different.

4. type of operation

One-combustion energy saving has long used the sales method of small profits but quick turnover to sell products, and the product price, market price and ex-factory price are the same. The purpose of this is to improve the sales volume of products and the visibility of enterprises.

5. Parameter size

There are many specifications and models of Rail type trolley forging furnace in the market now. Under normal circumstances, the price of large-sized Rail type trolley forging furnace is definitely higher than that of small-sized Rail type trolley forging furnace.

Rail type trolley forging furnace

6、One-combustion energy saving's strength

The company has many years of Rail type trolley forging furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Rail type trolley forging furnacethe advantage is Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.，the product looks atmospheric.。