What is a Horizontal trolley heating furnace? How much is the price of the heating furnace?

Horizontal trolley heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。The following is to introduce the Horizontal trolley heating furnace:

1、Brief introduction of Horizontal trolley heating furnace

Horizontal trolley heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，can be customized according to user's needs.。

Horizontal trolley heating furnace

2、Horizontal trolley heating furnace structure

The Horizontal trolley heating furnace structure is introduced as follows:

1. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. furnace chamber

A space for holding metallic materials for heating.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. Waste heat recovery system

Used to recover the exhaust heat of the heating furnace. There are two kinds of recovery methods, one is to recover by preheating combustion air, so that the recovered heat can return to the furnace again; The other is to use another recovery system to recover heat. The former is called air preheating mode, and the latter is usually called waste heat boiler mode.

Horizontal trolley heating furnace

3、Horizontal trolley heating furnace function

Horizontal trolley heating furnacemultifunctional, with functions such as Casting heating, anneal, quench, heat treatment and normalizing，the product looks atmospheric.，energy saving and environmental protection,energy-efficient,Easy to control,Easy to control,energy-efficient，at work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，be loved by our customers.。

Horizontal trolley heating furnace

4、Horizontal trolley heating furnace application

Horizontal trolley heating furnaces have the following purposes.

1. Metal heat treatment

In addition to forging heating, Horizontal trolley heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

2. Improve production efficiency

The Horizontal trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Horizontal trolley heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal forging heating

The Horizontal trolley heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

5. Improve production efficiency

The Horizontal trolley heating furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Horizontal trolley heating furnace

5、Video analysis of Horizontal trolley heating furnace

You can buy Horizontal trolley heating furnace according to your needs and show you product videos.。

Horizontal trolley heating furnace

As you can see from the live video.，Shandong yiran energy-saving environment protection co., ltd Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.。

6、Horizontal trolley heating furnace quotation

The Horizontal trolley heating furnace price is introduced as follows:

1. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Horizontal trolley heating furnace have more or less differences in price.

2. select a qualified person

The raw materials used by manufacturers of different products will definitely be different. Some manufacturers use good raw materials for processing, and the cost of producing and manufacturing products is definitely high. If the quality of products produced by manufacturers is not guaranteed and the materials used are not very good, then the production cost of products will be low, and the price will be very low.

3. company strength

One-combustion energy saving's scale and strength are relatively strong, the technology and technology of products produced by manufacturers are relatively advanced, and there is less waste of resources in the process of manufacturing, and the price of products will be relatively low.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. Reasonable cost

The manufacturing cost has a great influence on the price. There are many cost factors, including the purchase of raw materials and the quality of products. These factors are all cost inputs. One-combustion energy saving has made a strong balance between the cost input and the sales price, so that the quality of our products can be guaranteed and the comprehensive price of products can reach the degree of customer satisfaction.

Horizontal trolley heating furnace

Horizontal trolley heating furnaceWidely used inMetal heat treatment,Metal forging heating,Improve production efficiency,Metal tempering,Energy conservation and environmental protection and so on，is a common Horizontal trolley heating furnace，it has been widely used in aerospace, light industry, automobile, metallurgy, war industry and other industries。