What is a Medium temperature trolley forging furnace? Introduction to the Working Principle of forging furnace

Medium temperature trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

1、Brief introduction of Medium temperature trolley forging furnace

Medium temperature trolley forging furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，features include energy-efficient, energy saving and environmental protection, Easy to control, Stable and reliable and Easy to maintain，Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，is based on One-combustion energy saving is a Medium temperature trolley forging furnace newly developed by One-combustion energy saving。

Medium temperature trolley forging furnace

2、Medium temperature trolley forging furnace function

Medium temperature trolley forging furnaceit has the functions of heat treatment, temper, hardening and tempering, quench and hardening and tempering，Widely used inMetal tempering,Metal forging heating,Metal melting and casting,Energy conservation and environmental protection,Metal melting and casting and so on，customizable。

Medium temperature trolley forging furnace

3、Introduction of advantages of Medium temperature trolley forging furnace

Medium temperature trolley forging furnaces have the following advantages.

1. Uniform heating

The Medium temperature trolley forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Efficient combustion

The Medium temperature trolley forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Medium temperature trolley forging furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Wide application range

The Medium temperature trolley forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

5. Multiple fuel options

Although the Medium temperature trolley forging furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

Medium temperature trolley forging furnace

4、Medium temperature trolley forging furnace use

The purpose of Medium temperature trolley forging furnace is introduced as follows:

1. Energy conservation and environmental protection

The Medium temperature trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Medium temperature trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal heat treatment

In addition to forging heating, Medium temperature trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Metal tempering

By properly heating and cooling the metal material, the Medium temperature trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Medium temperature trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Medium temperature trolley forging furnace

5、Medium temperature trolley forging furnace characteristics

The Medium temperature trolley forging furnace features are as follows:

1. Stable and reliable

The Medium temperature trolley forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Medium temperature trolley forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Medium temperature trolley forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

The combustion system and ventilation system of the Medium temperature trolley forging furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

5. Efficient heating

The Medium temperature trolley forging furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

Medium temperature trolley forging furnace

6、One-combustion energy saving's strength

The company has many years of Medium temperature trolley forging furnace manufacturing experience, large scale and strong strength.。

One-combustion energy saving

Medium temperature trolley forging furnacethe advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.，It is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。