Introduction to Split type trolley forging furnace, introduction to forging furnace advantages and characteristics

Split type trolley forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，is an advanced Split type trolley forging furnace developed by our company in combination with the actual situation of the industry。

1、Brief introduction of Split type trolley forging furnace

Split type trolley forging furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.。

Split type trolley forging furnace

2、Split type trolley forging furnace use

The purpose of Split type trolley forging furnace is introduced as follows:

1. Metal forging heating

The Split type trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Metal heat treatment

In addition to forging heating, Split type trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Energy conservation and environmental protection

The Split type trolley forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

4. Metal tempering

By properly heating and cooling the metal material, the Split type trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Split type trolley forging furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Split type trolley forging furnace

3、Advantages of Split type trolley forging furnace principle

Split type trolley forging furnaceat work,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It is a product series that integrates Energy conservation and environmental protection, Metal forging heating, Metal heat treatment, Metal melting and casting and Metal tempering，it has the functions of quench, Forging heating, Casting heating, heat treatment and anneal，is a kind of high quality and low price Split type trolley forging furnace，can be customized according to user's needs.。

Split type trolley forging furnace

4、Split type trolley forging furnace real shot picture

Different specifications and models of high-definition pictures, so that everyone can see enough at once.。

Split type trolley forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Split type trolley forging furnace HD real shot

You can buy Split type trolley forging furnace according to your needs and show you Split type trolley forging furnace videos.。

Split type trolley forging furnace

As you can see from the live video.，One-combustion energy saving the advantage is The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

6、Split type trolley forging furnace application

Split type trolley forging furnaces have the following purposes.

1. Improve production efficiency

The Split type trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Metal forging heating

The Split type trolley forging furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Split type trolley forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Split type trolley forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Split type trolley forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Split type trolley forging furnace

Split type trolley forging furnacethe product looks beautiful.，multifunctional, with functions such as heat treatment, Casting heating, temper, hardening and tempering and normalizing。