Introduction to Full fiber high-temperature gas trolley furnace, how much is the price of the forging furnace?

Full fiber high-temperature gas trolley furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Full fiber high-temperature gas trolley furnace

Full fiber high-temperature gas trolley furnaceIt is a forging heating device using gas as fuel.，it is an ideal choice for customers to buy Full fiber high-temperature gas trolley furnace。

Full fiber high-temperature gas trolley furnace

2、Full fiber high-temperature gas trolley furnace application

Full fiber high-temperature gas trolley furnaces have the following purposes.

1. Energy conservation and environmental protection

The Full fiber high-temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal melting and casting

Although it is mainly used for forging heating, some types of Full fiber high-temperature gas trolley furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

3. Metal tempering

By properly heating and cooling the metal material, the Full fiber high-temperature gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Full fiber high-temperature gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Full fiber high-temperature gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Full fiber high-temperature gas trolley furnace

3、Full fiber high-temperature gas trolley furnace use

The purpose of Full fiber high-temperature gas trolley furnace is introduced as follows:

1. Energy conservation and environmental protection

The Full fiber high-temperature gas trolley furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Improve production efficiency

The Full fiber high-temperature gas trolley furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Full fiber high-temperature gas trolley furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Full fiber high-temperature gas trolley furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Metal forging heating

The Full fiber high-temperature gas trolley furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Full fiber high-temperature gas trolley furnace

4、Full fiber high-temperature gas trolley furnace characteristics

Full fiber high-temperature gas trolley furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Full fiber high-temperature gas trolley furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Full fiber high-temperature gas trolley furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Stable and reliable

The Full fiber high-temperature gas trolley furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Full fiber high-temperature gas trolley furnace

5、Full fiber high-temperature gas trolley furnace video detail

One-combustion energy saving provides customers with on-site high-definition video, fully demonstrates the advantages of on-site Full fiber high-temperature gas trolley furnacet operation, and helps customers to deeply understand the Full fiber high-temperature gas trolley furnace production process and production site, and gain favorable comments and recognition from customers.。

Full fiber high-temperature gas trolley furnace

As you can see from the live video.，One-combustion energy saving it has been widely used in petroleum, electron, shipping, metallurgy, machinery and other industries。

6、Full fiber high-temperature gas trolley furnace advantage

The advantages of Full fiber high-temperature gas trolley furnace are as follows:

1. Extend the service life of equipment

The Full fiber high-temperature gas trolley furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. easy to operate

The operation interface of the Full fiber high-temperature gas trolley furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

3. Efficient combustion

The Full fiber high-temperature gas trolley furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Multiple fuel options

Although the Full fiber high-temperature gas trolley furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Improve product quality

Because the Full fiber high-temperature gas trolley furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Full fiber high-temperature gas trolley furnace

Full fiber high-temperature gas trolley furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.。