Introduction to Fully automatic walking back and forth furnace, heating furnace advantages, characteristics and principles

Fully automatic walking back and forth furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，usually used in pharmacy, metallurgy, Household necessities, light industry, material and other fields，Structure consists of combustor, convection chamber, recovery of waste heat, Radiation chamber, ventilation system and so on，Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.，is a common Fully automatic walking back and forth furnace。The following is to introduce the Fully automatic walking back and forth furnace:

1、Brief introduction of Fully automatic walking back and forth furnace

Fully automatic walking back and forth furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，in the course of work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、Natural gas is used as a heat source, resulting in less waste gas and smoke after combustion, and less pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.。

Fully automatic walking back and forth furnace

2、Functional advantages of Fully automatic walking back and forth furnace

Fully automatic walking back and forth furnaces have the following advantages.

1. easy to operate

The operation interface of the Fully automatic walking back and forth furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

2. Wide application range

The Fully automatic walking back and forth furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

3. Extend the service life of equipment

The Fully automatic walking back and forth furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Efficient combustion

The Fully automatic walking back and forth furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

5. Improve product quality

Because the Fully automatic walking back and forth furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

Fully automatic walking back and forth furnace

3、Fully automatic walking back and forth furnace function

Fully automatic walking back and forth furnacemultifunctional, with functions such as Forging heating, anneal, temper, quench and hardening and tempering，the main features are energy saving and environmental protection, energy-efficient, Easy to maintain, energy saving and environmental protection and Stable and reliable，the main structure includes recovery of waste heat, convection chamber, Radiation chamber, ventilation system, Radiation chamber and so on，Fully automatic walking back and forth furnaceThe overall structural design is relatively simple。

Fully automatic walking back and forth furnace

4、Introduction of Fully automatic walking back and forth furnace characteristics

Fully automatic walking back and forth furnace has the following characteristics

1. Stable and reliable

The Fully automatic walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

2. Easy to maintain

The structural design of the Fully automatic walking back and forth furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

4. Stable and reliable

The Fully automatic walking back and forth furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

5. Easy to control

The combustion system and ventilation system of the Fully automatic walking back and forth furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

Fully automatic walking back and forth furnace

5、Fully automatic walking back and forth furnace structure

The Fully automatic walking back and forth furnace structure is introduced as follows:

1. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

2. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

3. Waste heat recovery system

Recover the waste heat in the exhaust gas of heating furnace to improve the energy utilization efficiency.

4. Radiation chamber

The heat load of the main place for Fully automatic walking back and forth furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

5. furnace chamber

A space for holding metallic materials for heating.

Fully automatic walking back and forth furnace

Fully automatic walking back and forth furnaceis a kind of high quality and low price Fully automatic walking back and forth furnace，Simple structure and advanced technology.，it is mainly composed of furnace chamber, ventilation system, combustor, furnace chamber and ventilation system，it has the functions of Casting heating, heat treatment, quench, normalizing and Forging heating。