Introduction to Plate chain quenching furnace, introduction to Forging furnace function advantages and characteristics

Plate chain quenching furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。The following is to introduce the Plate chain quenching furnace:

1、Brief introduction of Plate chain quenching furnace

Plate chain quenching furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the principle is simple.Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，Structure consists of ventilation system, Radiation chamber, ventilation system, recovery of waste heat, combustor and so on，Widely used in Metal melting and casting, Metal heat treatment, Metal forging heating, Improve production efficiency and Energy conservation and environmental protection，is an advanced Plate chain quenching furnace developed by our company in combination with the actual situation of the industry。

Plate chain quenching furnace

2、Plate chain quenching furnace function

Plate chain quenching furnacemultifunctional, with functions such as normalizing, anneal, temper, hardening and tempering and quench，at runtime,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。

Plate chain quenching furnace

3、Plate chain quenching furnace work site real shot

One-combustion energy saving Plate chain quenching furnace is completely upgraded, savoring the beauty of details.。

Plate chain quenching furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

4、Plate chain quenching furnace characteristics

The Plate chain quenching furnace features are as follows:

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Plate chain quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Easy to control

The combustion system and ventilation system of the Plate chain quenching furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

4. Efficient heating

The Plate chain quenching furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Easy to maintain

The structural design of the Plate chain quenching furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

Plate chain quenching furnace

5、Advantages of Plate chain quenching furnace principle

Plate chain quenching furnaceat the start of the operation,Heat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，It has the functions of Metal melting and casting, Metal tempering, Improve production efficiency, Metal forging heating and Metal heat treatment，is a kind of high quality and low price Plate chain quenching furnace，the main features are Stable and reliable, energy saving and environmental protection, energy-efficient, Strong adaptability and Easy to control，the product looks beautiful.。

Plate chain quenching furnace

Plate chain quenching furnaceat work,The high-temperature flame and flue gas generated by burning gas (such as natural gas and liquefied petroleum gas) in the furnace are used as heat sources to heat metal materials.，it has the functions of Casting heating, heat treatment, Forging heating, normalizing and quench，it is mainly composed of furnace chamber, convection chamber, ventilation system, furnace chamber and convection chamber，This productSimple structure and advanced technology.。