Introduction to Regenerative gas chain grate furnace, introduction to heating furnace function advantages and characteristics

Regenerative gas chain grate furnaceIt is a forging heating device using gas as fuel.，widely used inlight industry,petroleum,electron,pharmacy,aerospace and other industries，features include energy-efficient, Easy to control, Easy to maintain, energy saving and environmental protection and Stable and reliable，is a kind of Regenerative gas chain grate furnace manufactured by One-combustion energy saving。

1、Brief introduction of Regenerative gas chain grate furnace

Regenerative gas chain grate furnaceIt is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.，the product looks beautiful.，the main structure includes ventilation system, combustor, Radiation chamber, Radiation chamber, convection chamber and so on。

Regenerative gas chain grate furnace

2、Physical picture of Regenerative gas chain grate furnace

One-combustion energy saving Regenerative gas chain grate furnace HD picture, panoramic shooting。

Regenerative gas chain grate furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

3、Regenerative gas chain grate furnace use

The purpose of Regenerative gas chain grate furnace is introduced as follows:

1. Metal forging heating

The Regenerative gas chain grate furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

2. Improve production efficiency

The Regenerative gas chain grate furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

3. Metal tempering

By properly heating and cooling the metal material, the Regenerative gas chain grate furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Energy conservation and environmental protection

The Regenerative gas chain grate furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Metal melting and casting

Although it is mainly used for forging heating, some types of Regenerative gas chain grate furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

Regenerative gas chain grate furnace

4、Regenerative gas chain grate furnace advantage

The advantages of Regenerative gas chain grate furnace are as follows:

1. Uniform heating

The Regenerative gas chain grate furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

2. Improve product quality

Because the Regenerative gas chain grate furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

3. Extend the service life of equipment

The Regenerative gas chain grate furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

4. Multiple fuel options

Although the Regenerative gas chain grate furnace mainly uses natural gas as fuel, some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.

5. Intelligent control

The Regenerative gas chain grate furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

Regenerative gas chain grate furnace

5、Introduction of Regenerative gas chain grate furnace characteristics

Regenerative gas chain grate furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, natural gas produces less pollutants after combustion, which is beneficial to environmental protection. At the same time, the application of waste heat recovery system further improves the energy utilization efficiency.

2. Stable and reliable

The Regenerative gas chain grate furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Easy to maintain

The structural design of the Regenerative gas chain grate furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Strong adaptability

The Regenerative gas chain grate furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

5. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

Regenerative gas chain grate furnace

6、How much is the Regenerative gas chain grate furnace?

The Regenerative gas chain grate furnace price is introduced as follows:

1. quality factor

The higher the quality of the product, the longer its service life will be, and such products can create more amazing economic value for customers as much as possible. At the same time, customers are quite fond of such products, and One-combustion energy saving's product quality is guaranteed and the price is cost-effective.

2. Sales model

One-combustion energy saving Regenerative gas chain grate furnace manufacturer is a factory, the manufacturer produces and sells products directly to customers, without the influence of the price difference between middlemen. The market price of the manufacturer's products is the ex-factory price, and the Regenerative gas chain grate furnace price is also low.

3. Product configuration difference

Configuration refers to the hardware composition of the product, which mainly includes material selection, parts selection, etc. The higher the overall configuration of the product, the higher the price of the Regenerative gas chain grate furnace, which is beyond doubt. One-combustion energy saving makes every product with great care in the attitude of being highly responsible to customers, so the price of One-combustion energy saving Regenerative gas chain grate furnace is reasonable for products with the same configuration.

4. product function

The more functions a product has, the higher its manufacturing cost, so that the product can be used by customers as much as possible, which can create more useful value for customers, so the price will be higher.

5. technology content

The more advanced the technology, the higher the price will be, otherwise the product price will be low, and customers must pay attention to whether their own technology meets the production requirements when purchasing products.

Regenerative gas chain grate furnace

Regenerative gas chain grate furnacemultifunctional, with functions such as hardening and tempering, heat treatment, Casting heating, anneal and normalizing，it is widely used inwar industry,shipping,electron,building materials,surface treatment and other industries。