What is a Regenerative gas chain heating furnace? Introduction to the advantages, characteristics, and principles of the Forging furnace

Regenerative gas chain heating furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.。The following is to introduce the Regenerative gas chain heating furnace:

1、Brief introduction of Regenerative gas chain heating furnace

Regenerative gas chain heating furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a popular Regenerative gas chain heating furnace，Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.、Adopting advanced combustion technology and materials, it has a long service life and low maintenance cost.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.，It is a product series that integrates Metal forging heating, Metal melting and casting, Metal heat treatment, Metal tempering and Energy conservation and environmental protection，modern technology，The price is more affordable。

Regenerative gas chain heating furnace

2、Regenerative gas chain heating furnace characteristics

The Regenerative gas chain heating furnace features are as follows:

1. Efficient heating

The Regenerative gas chain heating furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

2. Easy to control

The combustion system and ventilation system of the Regenerative gas chain heating furnace can be adjusted as required to accurately control the temperature and atmosphere in the furnace and meet the heating requirements of different metal materials.

3. Easy to maintain

The structural design of the Regenerative gas chain heating furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

4. Efficient heating

The Regenerative gas chain heating furnace can heat the metal material to the required temperature in a short time and improve the production efficiency.

5. Strong adaptability

The Regenerative gas chain heating furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

Regenerative gas chain heating furnace

3、Regenerative gas chain heating furnace performance advantage

The advantages of Regenerative gas chain heating furnace are as follows:

1. Rapid temperature rise

The Regenerative gas chain heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Uniform heating

The Regenerative gas chain heating furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

4. Rapid temperature rise

The Regenerative gas chain heating furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Wide application range

The Regenerative gas chain heating furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Regenerative gas chain heating furnace

4、Advantages of Regenerative gas chain heating furnace principle

Regenerative gas chain heating furnaceHeat of combustion based on fuel. Fuel gas (such as natural gas, liquefied petroleum gas, etc.) is mixed with combustion-supporting air through the burner and burned to produce high-temperature flame and flue gas. These high-temperature flames and smoke exchange heat with metal materials in the furnace, so that they gradually heat up to the temperature required for forging.，the advantage is Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、Using regenerative combustion system or advanced burner design can realize the uniform distribution of temperature in the furnace, ensure the uniform heating of metal materials and improve product quality.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、It has the advantages of high heating efficiency, high energy utilization, accurate temperature control, good environmental protection performance, simple operation and strong adaptability.、It can improve the plasticity and fluidity of metal materials, reduce the difficulty and cost of forging, and improve product quality and production efficiency.。

Regenerative gas chain heating furnace

5、Regenerative gas chain heating furnace function

Regenerative gas chain heating furnaceit has the functions of anneal, Casting heating, normalizing, hardening and tempering and heat treatment。

Regenerative gas chain heating furnace

6、One-combustion energy saving workshop real shot

Speak directly with facts on the spot。

Regenerative gas chain heating furnace

As you can see from the live video.One-combustion energy saving Strong adaptability,Easy to maintain,energy-efficient,Strong adaptability,energy saving and environmental protection。

Regenerative gas chain heating furnaceit has been widely used in aerospace, machinery, war industry, Machinery manufacturing, pharmacy and other industries，It has a wide range of uses, including Improve production efficiency, Metal forging heating, Energy conservation and environmental protection, Metal heat treatment and Metal tempering，the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability.。