Introduction to Regenerative natural gas chain grate furnace, heating furnace advantages, characteristics and principles

Regenerative natural gas chain grate furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.，the main features are energy saving and environmental protection, Easy to maintain, Stable and reliable, energy-efficient and Strong adaptability，is a popular Regenerative natural gas chain grate furnace，at work,The high-temperature flame and flue gas generated when the fuel burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature. Fuel is ejected from the burner and burned, resulting in high-temperature flame and high-temperature flue gas. The high-temperature flame transfers heat to the furnace tube in the radiation chamber through radiation, and then to the medium in the furnace tube. The high-temperature flue gas enters the convection chamber of the heating furnace upward due to the suction force of the chimney or the action of the induced draft fan, and the heat is transferred to the furnace tube in the convection chamber by convection, and then to the medium in the furnace tube.，the advantage is The user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Uniform heating and precise control can be realized, so it is helpful to improve the product quality and yield of metal materials.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.。

1、Brief introduction of Regenerative natural gas chain grate furnace

Regenerative natural gas chain grate furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks atmospheric.。

Regenerative natural gas chain grate furnace

2、Functional advantages of Regenerative natural gas chain grate furnace

Regenerative natural gas chain grate furnaces have the following advantages.

1. Intelligent control

The Regenerative natural gas chain grate furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Efficient combustion

The Regenerative natural gas chain grate furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Regenerative natural gas chain grate furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Improve product quality

Because the Regenerative natural gas chain grate furnace can realize uniform heating and precise control, it is helpful to improve the product quality and yield of metal materials.

5. easy to operate

The operation interface of the Regenerative natural gas chain grate furnace is friendly and easy for operators to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.

Regenerative natural gas chain grate furnace

3、Regenerative natural gas chain grate furnace application

Regenerative natural gas chain grate furnaces have the following purposes.

1. Energy conservation and environmental protection

The Regenerative natural gas chain grate furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal forging heating

The Regenerative natural gas chain grate furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Regenerative natural gas chain grate furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Improve production efficiency

The Regenerative natural gas chain grate furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

5. Metal tempering

By properly heating and cooling the metal material, the Regenerative natural gas chain grate furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

Regenerative natural gas chain grate furnace

4、Introduction of Regenerative natural gas chain grate furnace characteristics

Regenerative natural gas chain grate furnace has the following characteristics

1. Easy to maintain

The structural design of the Regenerative natural gas chain grate furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

2. Stable and reliable

The Regenerative natural gas chain grate furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

3. Strong adaptability

The Regenerative natural gas chain grate furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

4. Easy to maintain

The structural design of the Regenerative natural gas chain grate furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Strong adaptability

The Regenerative natural gas chain grate furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

Regenerative natural gas chain grate furnace

5、Working principle of Regenerative natural gas chain grate furnace

Regenerative natural gas chain grate furnacein the course of work,The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，It is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，customizable。

Regenerative natural gas chain grate furnace

6、Regenerative natural gas chain grate furnace quotation

The Regenerative natural gas chain grate furnace price is introduced as follows:

1. market supply and demand

If there is a large demand for Regenerative natural gas chain grate furnace in the market, the price of products will naturally be high. On the other hand, if the supply of this equipment exceeds demand, then manufacturers will have inventory accumulation. In order to dispose of these products as soon as possible, some manufacturers will sell them by lowering the price of products, so the price will be very low.

2. After-sales service level

Service factors always affect the sales price of products, and high-quality service will make customers have greater satisfaction and recognition. The service factors mainly include pre-sales service, in-sales service and after-sales service. For each stage of service, our company takes the price factor into account and makes a reasonable judgment between service and price, so that the Regenerative natural gas chain grate furnace price and service can meet the actual needs of customers.

3. brand

Different brands of products in the same series have more or less differences in product prices, and different brands of Regenerative natural gas chain grate furnace have more or less differences in price.

4. Low cost of raw materials

Cost is a direct and fundamental factor that affects the price of Regenerative natural gas chain grate furnace. The manufacturing cost is reflected in the capital investment spent on raw materials, labor and technology, which is high in cost, high in Regenerative natural gas chain grate furnace price, low in cost and low in price.

5. Company size

Our factory has mature and perfect production technology, advanced and intelligent processing technology, abundant labor resources and low investment. Coupled with the influence of special geographical location, our company has invested much less in manpower, material resources and financial resources than other manufacturers.

Regenerative natural gas chain grate furnace

Regenerative natural gas chain grate furnaceit has the characteristics of Easy to maintain, energy saving and environmental protection, Easy to control, Stable and reliable and energy-efficient，the product looks beautiful.。