Introduction to Double chamber forging furnace, forging furnace specifications, model parameters

Double chamber forging furnaceIt is a kind of equipment that uses natural gas as fuel to heat metal materials and make them reach forging temperature.。The following is to introduce the Double chamber forging furnace:

1、Brief introduction of Double chamber forging furnace

Double chamber forging furnaceIt is an efficient, energy-saving and environment-friendly metal heating device.，the product looks beautiful.，is a Double chamber forging furnace，it is an ideal choice for customers to buy Double chamber forging furnace。

Double chamber forging furnace

2、Double chamber forging furnace application

Double chamber forging furnaces have the following purposes.

1. Improve production efficiency

The Double chamber forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

2. Energy conservation and environmental protection

The Double chamber forging furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

3. Metal tempering

By properly heating and cooling the metal material, the Double chamber forging furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

4. Metal heat treatment

In addition to forging heating, Double chamber forging furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

5. Improve production efficiency

The Double chamber forging furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Double chamber forging furnace

3、Introduction of advantages of Double chamber forging furnace

Double chamber forging furnaces have the following advantages.

1. Extend the service life of equipment

The Double chamber forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

2. clean energy

Natural gas, as a clean energy source, produces less waste gas and dust after combustion, which has little pollution to the environment. This will help reduce industrial emissions and improve the atmospheric environment.

3. Reduce operating costs

The efficient combustion and waste heat recovery system of the Double chamber forging furnace can significantly reduce energy consumption, thus reducing operating costs.

4. Rapid temperature rise

The Double chamber forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Wide application range

The Double chamber forging furnace is suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.

Double chamber forging furnace

4、On-site real shot of Double chamber forging furnace

The Double chamber forging furnace has been upgraded, and the beauty of details is appreciated.。

Double chamber forging furnace

Note: All the pictures in this article were taken by One-combustion energy saving manufacturer.。

5、Introduction of Double chamber forging furnace characteristics

Double chamber forging furnace has the following characteristics

1. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Double chamber forging furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

2. Easy to maintain

The structural design of the Double chamber forging furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

3. Strong adaptability

The Double chamber forging furnace can be used for forging and heating of bar, round steel, square steel, steel plate and other metal materials, and has a wide range of applications.

4. Easy to control

By adjusting the burner and ventilation system, the temperature and atmosphere in the furnace can be accurately controlled to meet the heating requirements of different metal materials.

5. Stable and reliable

The Double chamber forging furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Double chamber forging furnace

6、Double chamber forging furnace advantage

The advantages of Double chamber forging furnace are as follows:

1. Intelligent control

The Double chamber forging furnace is usually equipped with an intelligent control system, which can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.

2. Uniform heating

The Double chamber forging furnace adopts regenerative combustion system or advanced burner design, which can realize uniform distribution of temperature in the furnace, ensure uniform heating of metal materials and improve product quality.

3. Efficient combustion

The Double chamber forging furnace adopts advanced combustion technology and control system, which can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.

4. Rapid temperature rise

The Double chamber forging furnace can heat the metal material to the required temperature in a short time, which improves the production efficiency.

5. Extend the service life of equipment

The Double chamber forging furnace adopts advanced combustion technology and materials, which has a long service life and low maintenance cost.

Double chamber forging furnace

Double chamber forging furnacein the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，it is widely used in electron, pharmacy, war industry, surface treatment and light industry，is a kind of high quality and low price Double chamber forging furnace。