Introduction to Automatic temperature controlled chain annealing furnace, heating furnace specifications, model parameters

Automatic temperature controlled chain annealing furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.。

1、Brief introduction of Automatic temperature controlled chain annealing furnace

Automatic temperature controlled chain annealing furnaceIt is a kind of equipment which uses gas as fuel and is specially used for heating metal before forging.，is a kind of high quality and low price Automatic temperature controlled chain annealing furnace，in the course of work,Heat of combustion based on fuel. Natural gas is sprayed from the burner, mixed with combustion-supporting air and burned to produce high-temperature flame and smoke. These high-temperature flames and smoke transfer heat to the metal materials in the furnace by radiation and convection, so that they gradually heat up to the temperature required for forging.，usually used in surface treatment, material, electron, Household necessities, pharmacy and other fields，reliable quality。

Automatic temperature controlled chain annealing furnace

2、Automatic temperature controlled chain annealing furnace characteristics

The Automatic temperature controlled chain annealing furnace features are as follows:

1. Strong adaptability

The Automatic temperature controlled chain annealing furnace is suitable for forging and heating of various metal materials and has a wide range of applications.

2. energy saving and environmental protection

As a clean energy source, gas produces less waste gas and waste smoke after combustion, which is beneficial to environmental protection. At the same time, some Automatic temperature controlled chain annealing furnaces are also equipped with waste heat recovery system, which further improves the energy utilization efficiency.

3. Efficient heating

The Automatic temperature controlled chain annealing furnace can heat the metal to the required forging temperature in a very short time, reducing the loss caused by the oxidation of the metal.

4. Easy to maintain

The structural design of the Automatic temperature controlled chain annealing furnace is reasonable and easy to maintain, which reduces the operating cost and failure rate of the equipment.

5. Stable and reliable

The Automatic temperature controlled chain annealing furnace has a stable combustion system and temperature control system, which can ensure the uniformity and stability of the temperature in the furnace, thus improving the quality and production efficiency of forged products.

Automatic temperature controlled chain annealing furnace

3、Automatic temperature controlled chain annealing furnace application

Automatic temperature controlled chain annealing furnaces have the following purposes.

1. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature controlled chain annealing furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

2. Metal forging heating

The Automatic temperature controlled chain annealing furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

3. Metal heat treatment

In addition to forging heating, Automatic temperature controlled chain annealing furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

4. Energy conservation and environmental protection

The Automatic temperature controlled chain annealing furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

5. Improve production efficiency

The Automatic temperature controlled chain annealing furnace has the advantages of fast heating speed and accurate temperature control, which can improve production efficiency. This is especially important for mass-produced forging workshops.

Automatic temperature controlled chain annealing furnace

4、Automatic temperature controlled chain annealing furnace HD real shot

Speak directly with facts on the spot。

Automatic temperature controlled chain annealing furnace

As you can see from the live video.，One-combustion energy saving It is mostly used in Metal forging heating, Energy conservation and environmental protection, Metal melting and casting, Metal heat treatment, Metal tempering, Improve production efficiency and so on。

5、Automatic temperature controlled chain annealing furnace price concessions

The Automatic temperature controlled chain annealing furnace price is introduced as follows:

1. market competition

The difference between the supply and demand of manufacturers and customers will also affect the Automatic temperature controlled chain annealing furnace price. When the demand of customers on the market increases and the supply of products by manufacturers is small, the Automatic temperature controlled chain annealing furnace price will increase with the increase of demand. On the contrary, when the supply of product manufacturers on the market exceeds the demand of customers, the Automatic temperature controlled chain annealing furnace price will decrease.

2. Model type

There are many specifications and models of Automatic temperature controlled chain annealing furnace, and different specifications and models must have different production processes. Moreover, the capital spent on the production of large-sized products must be much more than that of small-sized products, so the price of large-sized products is relatively high.

3. Quality advantages and disadvantages

Quality generally refers to the quality of the product. The better the quality, the higher the quality of the product. Because the quality is directly proportional to the cost of the product, the price of the Automatic temperature controlled chain annealing furnace will vary greatly. One-combustion energy saving attaches great importance to the quality of products, and the formulation of prices is also reasonable.

4. market supply and demand

This is one of the external factors that lead to price fluctuation. Only after fully understanding the market can we make a reasonable decision. One-combustion energy saving has a deep understanding of this factor, so the price of our Automatic temperature controlled chain annealing furnace is more reasonable.

5. Brand strength

At present, there are various brands of Automatic temperature controlled chain annealing furnace in Jinan, Shandong province. The performance, quality and after-sales of products under different brands are different, and the prices of Automatic temperature controlled chain annealing furnace are different.

Automatic temperature controlled chain annealing furnace

6、Brief introduction of One-combustion energy saving

One-combustion energy saving is a professional manufacturer of heating furnace, which produces Automatic temperature controlled chain annealing furnace with the advantage is The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Efficient combustion and waste heat recovery system can significantly reduce energy consumption, thus reducing operating costs.、Adopting advanced combustion technology and control system can realize full combustion of natural gas and improve combustion efficiency. At the same time, some equipment is also equipped with waste heat recovery system, which can further recycle the waste heat in exhaust smoke and improve energy utilization efficiency.、Natural gas is mainly used as fuel, but some equipment also supports other types of gas or liquid fuel, which has strong fuel adaptability. and reasonable prices. Welcome new and old customers to visit and buy. Click online consultation。

One-combustion energy saving

Automatic temperature controlled chain annealing furnaceThe user interface is friendly, and the operator is easy to use. At the same time, the equipment also has the function of fault diagnosis and alarm, which can find and deal with abnormal situations in time.、The use of clean and environmentally friendly natural gas as fuel effectively avoids the adverse effects of chemical reactions between impurities such as coal-fired furnaces and forgings during heating. At the same time, natural gas has high calorific value and high combustion temperature, and the combustion temperature can be further increased by preheating air and fuel. In addition, the gas forging heating furnace also has good heat loss control ability and intelligent control system, which can accurately adjust the ratio of air to natural gas, ensure full combustion of natural gas, and reduce mechanical incomplete combustion and chemical incomplete combustion.、Usually equipped with intelligent control system, it can automatically adjust the parameters such as gas supply and air flow according to the heating demand, and realize accurate control of the temperature and atmosphere in the furnace.、Suitable for forging and heating of various metal materials, including steel, aluminum and copper. At the same time, it can also be used in metal heat treatment, tempering and other technological processes.、The metal material can be heated to the required temperature in a short time, and the production efficiency is improved.，It is an important heating equipment before metal forging. It uses natural gas as fuel to heat metal materials through high-temperature flame and smoke generated by combustion to meet the requirements of forging process.。