Introduction to Automatic temperature control chain heating furnace and forging furnace working principle

Automatic temperature control chain heating furnaceIt is a forging heating device using gas as fuel.，is carefully developed by One-combustion energy saving combined with advanced technology。The following is to introduce the Automatic temperature control chain heating furnace:

1、Brief introduction of Automatic temperature control chain heating furnace

Automatic temperature control chain heating furnaceIt is a kind of heating equipment using natural gas as fuel, which is mainly used to heat metal materials to the required forging temperature in a short time.，it is mainly composed of recovery of waste heat, combustor, convection chamber, ventilation system and furnace chamber，This Automatic temperature control chain heating furnaceThe overall structural design is simple, diverse and beautiful.。

Automatic temperature control chain heating furnace

2、Automatic temperature control chain heating furnace structure composition

The Automatic temperature control chain heating furnace structure is introduced as follows:

1. furnace chamber

A space for holding metallic materials for heating.

2. ventilation system

Ensure the gas flow in the furnace and maintain the stability of the atmosphere and temperature in the furnace.

3. Radiation chamber

The heat load of the main place for Automatic temperature control chain heating furnace heat exchange accounts for about 70%-80% of the whole furnace. The furnace tube in the radiation room conducts heat through flame or high-temperature flue gas, which is mainly radiant heat, so it is called radiation tube.

4. combustor

The device that mixes natural gas with combustion-supporting air and ejects it is the core component of the heating furnace.

5. convection chamber

The material is heated by convection heat transfer of high temperature flue gas discharged from the radiation chamber. Flue gas washes the tube wall of the furnace tube at a high speed to carry out effective convection heat transfer, and its heat load accounts for about 20%-30% of the whole furnace. The convection chamber is generally arranged above the radiation chamber, and some are placed on the ground alone. In order to improve the heat transfer effect, nail head tubes or finned tubes are often used in furnace tubes.

Automatic temperature control chain heating furnace

3、Working principle of Automatic temperature control chain heating furnace

Automatic temperature control chain heating furnacethe principle is simple.The high-temperature flame and flue gas generated when fuel (natural gas) burns in the furnace are used as heat sources to heat the medium flowing in the tube to reach the specified process temperature.，the product looks atmospheric.。

Automatic temperature control chain heating furnace

4、Automatic temperature control chain heating furnace function

Automatic temperature control chain heating furnaceit has the functions of temper, normalizing, heat treatment, Casting heating and hardening and tempering，is developed and improved by One-combustion energy saving。

Automatic temperature control chain heating furnace

5、Automatic temperature control chain heating furnace use

The purpose of Automatic temperature control chain heating furnace is introduced as follows:

1. Energy conservation and environmental protection

The Automatic temperature control chain heating furnace uses clean energy as fuel, which has lower emissions and higher energy efficiency than traditional coal-fired or oil-fired stoves. This is helpful to reduce environmental pollution and realize green production.

2. Metal heat treatment

In addition to forging heating, Automatic temperature control chain heating furnaces can also be used for metal heat treatment processes, such as annealing and tempering. These processes can improve the microstructure and properties of metal materials, and improve their service life and mechanical properties.

3. Metal melting and casting

Although it is mainly used for forging heating, some types of Automatic temperature control chain heating furnaces can also be used in metal melting and casting processes. This is especially suitable for melting and casting of small or special alloys.

4. Metal tempering

By properly heating and cooling the metal material, the Automatic temperature control chain heating furnace can realize the quenching and tempering treatment of the metal. This is helpful to adjust the hardness and toughness of metal to meet the needs of different workpieces.

5. Metal forging heating

The Automatic temperature control chain heating furnace can heat the metal material to the temperature required for forging, improve its plasticity and fluidity, and thus facilitate forging. This is very important for the forging of various metal materials.

Automatic temperature control chain heating furnace

6、One-combustion energy saving workshop pictures

The finished products of the Automatic temperature control chain heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

One-combustion energy saving

The finished products of the Automatic temperature control chain heating furnace factory are actually photographed, and all kinds of specifications and models are photographed in all directions. The design is exquisite and the quality is reliable. Don't forget to make an appointment to visit the factory by phone.。

Automatic temperature control chain heating furnaceis a Automatic temperature control chain heating furnace，the main features are energy saving and environmental protection, Easy to control, Stable and reliable, Easy to maintain and Strong adaptability，it can be used in Machinery manufacturing, aerospace, war industry, machinery, metallurgy and other industries。